Da-Lite Large Advantage Electrol 36980L 产品宣传页
产品代码
36980L
S
UGGESTED SPECIFICATIONS: _______________ projection screen(s), __________ (H) x ____________ (W), electrically operated 120 volt
(60Hz), not more than 2.4 amp with a quick connect male plug-in connector on the motor. Shall have specially designed motor mounted
inside the roller, to be three wire with ground, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears,
capacitor and an electric brake to prevent coasting. To have preset but adjustable limit switches to automatically stop picture surface in
the “up” and “down” positions. Junction box shall be internally integrated into the housing making it possible to install the housing and
wire to the building’s electrical system during construction. The junction box shall contain a quick connect connector that is mounted in
the housing for easy plug-in connection to the motorized fabric and roller assembly. Rigid metal roller, to be at least 5¾" in diameter (on
screens 14' to 18' wide) or 7" in diameter (on screens where either height or width equal or exceed 20'). The motorized fabric and roller
assembly to be installed in the case at the factory or at a later time at the job site. Roller mounting brackets to be adjustable to allow
centering or offsetting of the screen within the case. Screen to be designed for left or right-hand motor installation. Screen fabric to be
flame retardant and mildew resistant fiberglass with black masking borders standard. Bottom of fabric shall be formed into a pocket
holding a metal rod. Heavy duty plastic caps shall protect the ends of the rod. Case to be made of extruded aluminum powder coated
white. End caps to be of heavy gauge steel, powder coated white. Bottom of case to have a removable access door. Door to be of
extruded aluminum powder coated white. Bottom of case to be self-trimming, with a built-in flange around the bottom of the case. To be
complete with a three-position control switch and cover plate. Suitable for use in environmental air space in accordance with section 300-
22 (c) of the National Electric Code, and sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1. Screen
to be listed by Underwriters’ Laboratories.
Matte White: Horizontal seam required when both dimensions exceed 16'.
SQUARE FORMAT DIMENSIONS (screens with ^ have 2" standard black drop at top)
Sizes
Overall Length of Case (does not include flange)
Approx. Ship. Wt.
H x W
Cm
In.
Cm
Lbs.
Kg
10'6" x 14'^
320 x 427
183½"
466
554
251.3
14' x 14'
427 x 427
183½"
466
565
256.3
12' x 16'^
366 x 488
207½"
527
628
284.9
16' x 16'
488 x 488
207½"
527
637
288.9
13'6" x 18'^
411 x 549
231½"
588
702
318.3
18' x 18'
549 x 549
231½"
588
721
327.0
15' x 20'^
457 x 610
255½"
649
810
367.4
20' x 20'
610 x 610
255½"
649
834
378.3
16'6" x 22'^
503 x 671
279½"
710
891
404.2
22' x 22'
671 x 671
279½"
710
920
417.3
18' x 24'^
549 x 732
303½"
771
973
441.3
DA-LITE SCREEN COMPANy, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
HDTV (16:9) FORMAT DIMENSIONS (2" standard black drop at top)
Viewing Area
Nominal Diagonal
Overall Length of Case (does not include flange)
Approx. Ship. Wt.
H x W
Cm
In.
Cm
In.
Cm
Lbs.
Kg
106 x 188
269 x 478
216
549
207½"
527
616
279.4
119 x 212
302 x 538
243
617
231½"
588
688
312.1
133 x 236
338 x 599
271
688
255½"
649
793
359.7
VIDEO (NTSC 4:3) FORMAT DIMENSIONS (2" standard black drop at top)
Viewing Area
Nominal Diagonal
Overall Length of Case (does not include flange)
Approx. Ship. Wt.
H x W
Cm
In.
Cm
In.
Cm
Lbs.
Kg
123" x 164"
312 x 417
210"
533
183½"
466
553
250.8
141" x 188"
358 x 478
240"
610
207½"
527
627
284.4
159" x 212"
404 x 538
265"
673
231½"
588
702
318.4
177" x 236"
450 x 599
295"
749
255½"
649
780
353.8
SPECIFICATION DATA
LARGE ADVANTAGE
®
ELECTROL
®
Automatic Electric Projection Screen Model
Overall case length dimensions ±¼ (6mm)".
Detail dimensional drawings, wiring diagrams and installation instructions available upon request.
Specifications subject to change without notice.
Custom formats and sizes available upon request.
WIDE (16:10) FORMAT DIMENSIONS
Viewing Area
Nominal Diagonal
Overall Length of Case (does not include flange)
Approx. Ship. Wt.
H x W
Cm
In.
Cm
In.
Cm
Lbs.
Kg
110" x 176"
279 x 447
208"
528
195½"
497
631
286.2
117
1
⁄
2
" x 188"
283 x 478
222"
564
207½"
527
662
300.3