HP 721953-081 用户手册
Function board
Description
Spare part number
Function board
721943-001
Before removing the function board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
)
b.
Keyboard (see
)
c.
Optical drive (
d.
Top cover (see
Remove the function board:
1.
Position the top cover upside-down.
2.
Remove the Phillips PM2.0×3.0 screw (1) that secures the function board to the top cover.
3.
Lift the cable side of the board slightly, and then pull the board toward the right (inside of cover) until
the left side of the board comes out from under the holder (2).
the left side of the board comes out from under the holder (2).
Component replacement procedures
65