Kingston Technology 2GB(2 x 1GB), 1066MHz,SDRAM-DDR2, 2.2V, CL5 (5-5-5-15), 128M X 64, Non-ECC KHX8500D2K2/2GN 数据表

Memory Module Specifications

2GB (1GB 128M x 64-Bit x 2 pcs.)
PC2-8500 CL5 240-Pin DIMM Kit

Kingston.com

Document No. 4804671-001.D00    07/18/11    Page 1

Kingston’s KHX8500D2K2/2GN is a kit of two 128M x 64-bit 
1GB (1024MB) DDR2-1066 CL5 SDRAM (Synchronous 
DRAM) “NVIDIA SLI-Ready” memory modules, based on 
sixteen 64M x 8-bit DDR2 FBGA components per module. 
Total kit capacity is 2GB (2048MB). Each module pair has 
been tested to run at DDR2-1066MHz at a latency timing 
of 5-5-5-15 at 2.2V. The SPD is programmed to JEDEC 
standard latency 800Mhz timing of 5-5-5-18 at 1.8V. Each 
240-pin DIMM uses gold contact fingers and requires +1.8V. 
The electrical and mechanical specifications are as follows:

Clock Cycle Time (tCK) CL=5  

2.5ns (min.) / 8ns (max.)

Row Cycle Time (tRC)  

51.5ns (min.)

Refresh to Active/Refresh  

105ns 

Command Time (tRFC)

Row Active Time (tRAS)  

39ns (min.) / 70,000ns (max.)

Single Power Supply of  

+1.8V (+/- .1V)

Power  

2.025 W (operating per module)

UL Rating  

94 V - 0

Operating Temperature  

0° C to 55° C

Storage Temperature  

-55° C to +125° C

•  Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
•  Double-data-rate architecture; two data transfers per  

clock cycle

•  Bidirectional data strobe(DQS)
•  Differential clock inputs(CK and CK)
•  DLL aligns DQ and DQS transition with CK transition
•  Programmable Read latency 5 (clock)
•  Burst Length: 4, 8 (Interleave/nibble sequential)
•  Programmable Burst type (sequential & interleave)
•  Timing Reference: 5-5-5-18 at +1.8V / 5-5-5-15 at +2.2V
•  Edge aligned data output, center aligned data input
•  Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
•  Serial presence detect with EEPROM
•  High Performance Heat Spreader
•  PCB : Height 1.180” (30.00mm), double sided component

Continued >>

Keyed