Da-Lite Large Advantage Deluxe Electrol 36859 产品宣传页

UGGESTED SPECIFICATIONS:  

 projection screen(s), 

(H) x  

  (W).  The  Advantage

®

 Deluxe 

Screen shall have two motors, one to operate door and one to operate screen. Door motor electrically operated 120 volt (60 Hz) not more 

than 1.2 amp, mounted inside the roller, to be three wire with ground, quick reversal type, oiled for life, with automatic thermal overload 

cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but adjustable limit switches to automatically 

stop fabric door in the open position. The roller to be of 1.6" diameter aluminum. Screen motor is electrically operated 120 volt (60 Hz) 

not more than 2.4 amp, mounted inside the roller, to be three wire with ground quick reversal type, oiled for life, with automatic thermal 

overload cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but adjustable limit switches to 

automatically stop picture surface in the “up” and “down” positions. Rigid metal roller, to be at least 5¾" in diameter (on screens 14' 

to 18' wide) or 7" in diameter (on screens where either height or width equal or exceed 20'). Screen fabric to be flame retardant and 

mildew resistant fiberglass with black masking borders standard. Bottom of fabric shall be formed into a pocket holding a metal rod with 

plastic caps. Case shall be a white powder coated aluminum extrusion. Bottom of case to be self-trimming with a built-in flange around 

the bottom of the case. A section of the bottom of the case shall be a retractable aluminum door that opens and closes automatically 

with the lowering and raising of the picture surface. The balance of the bottom of the case shall be a second aluminum door with manual 

opening to provide access. Junction box shall be internally integrated into the housing making it possible to install the housing and wire 

to the building’s electrical system during construction. The junction box shall contain a quick connect connector that is mounted in the 

housing for easy plug-in connection to the motorized fabric and roller assembly. The motorized fabric and roller assembly to be installed 

in the case at the factory or at a later time at the job site. To be complete with integrated low voltage control unit and three position 

control switch with cover plate. Suitable for use in environmental air space in accordance with section 300-22 (c) of the National Electric 

Code, and sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1. Screen to be listed by Underwriters’ 

Laboratories.

Matte White:  Horizontal seam required when both dimensions exceed 16'.

  123" x 164" 

312 x 417 

210" 

533 

183½" 

466 

587 

266.3

  141" x 188" 

358 x 478 

240" 

610 

207½" 

527 

662 

300.3

  159" x 212" 

404 x 538 

265" 

673 

231½" 

588 

738 

334.8

  177" x 236" 

450 x 599 

295" 

749 

255½" 

649 

847 

384.2

 

10'6" x 14'^ 

320 x 427 

183½" 

466 

588 

266.7

 

14' x 14' 

427 x 427 

183½" 

466 

599 

271.7

 

12' x 16'^ 

366 x 488 

207½" 

527 

663 

300.7

 

16' x 16' 

488 x 488 

207½" 

527 

671 

304.4

 

13'6" x 18'^ 

411 x 549 

231½" 

588 

738 

334.8

 

18' x 18' 

549 x 549 

231½" 

588 

757 

343.4

 

15' x 20'^ 

457 x 610 

255½" 

649 

847 

384.2

 

20' x 20' 

610 x 610 

255½" 

649 

871 

395.1

 

16'6" x 22'^ 

503 x 671 

279½" 

710 

929 

421.4

 

22' x 22' 

671 x 671 

279½" 

710 

958 

434.5 

 

18' x 24'^ 

549 x 732 

303½" 

771 

1012 

459.0

  106" x 188" 

269 x 478 

216" 

549 

207½" 

527 

651 

295.3

  119" x 212" 

302 x 538 

243" 

617 

231½" 

588 

724 

328.4

  133" x 236" 

338 x 599 

271" 

688 

255½" 

649 

830 

376.5

3100 North Detroit Street

Post Office Box 137

Warsaw, Indiana 46581-0137

Phone: 574-267-8101

800-622-3737

Fax: 574-267-7804

Toll Free Fax: 877-325-4832

www.da-lite.com

e-mail: info@da-lite.com

Overall case length dimensions ±¼" (6mm).

Detail dimensional drawings, wiring diagrams and installation instructions available upon request.

Specifications subject to change without notice.

Custom formats and sizes available upon request.

  110" x 176" 

279 x 447 

208" 

528 

195½" 

497 

631 

286.2

 117

1

⁄

2

" x 188" 

283 x 478 

222" 

564 

207½" 

527 

662 

300.3