IQinVision Alliance-pro IQA33WI-A3 用户手册

产品代码
IQA33WI-A3
下载
页码 14
Architectural and Engineering Specification 
                
 
IQA33WI, IQA33WE, IQA33WX 
Page 1 of 14 
         Revision: (07302013) 
 
IQeye Alliance-pro Series, IQA33WI, IQA33WE, IQA33WX 
H.264, 3.6 Megapixel, Color Indoor/Outdoor Vandal Resistant Network Dome Camera with Integrated 
Varifocal Lens 
PART 2 – PRODUCTS 
2.1  
MANUFACTURER 
A.  IQinVision 
33122 Valle Road 
San Juan Capistrano, CA 92675 
Phone +1.949.369.8100 
Fax +1.949.369.8105 
 
2.2 
DESCRIPTION 
 
The product specified shall be an all-in-one vandal/tamper resistant 3.6 megapixel resolution 
color dome camera designed for indoor/outdoor applications providing multiple H.264 (MPEG4, 
Part 10) and simultaneous MJPEG streams that can be individually configured.  The dome 
camera was designed to provide 16fps at maximum resolution with audio, and shall conform to 
the ONVIF and PSIA standards.   
 
The camera uses a Wide Dynamic Range (WDR) sensor for enhanced image dynamic range and 
DTS (Direct-To-Storage) recording.  The camera offers Day/Night functionality with high 
sensitivity for use in low light indoor/outdoor applications, and is prepackaged with a varifocal 
IR corrected lens to allow manual zoom and focus adjustment.  The dome camera is constructed 
of cast-aluminum housing with polycarbonate dome bubble and auto tracking inner liner.  The 
dome camera was designed to protect against water and dust to IP66 / NEMA 4 standards.  
Requiring low power the dome camera is PoE (IEEE 802.3af) compliant, and can be powered 
from 12-24VDC or 24VAC. 
 
2.3 
GENERAL REQUIREMENTS 
A.  The IP dome camera shall be a high impact aluminum, vandal resistant, Day/Night color dome 
camera with a progressive scan CMOS sensor. 
 
B.  The IP dome camera shall utilize a CMOS sensor that is 1/3-inch with a dichroic infrared mirror 
capable of producing a resolution of 3.6 megapixels. 
 
C.  The IP dome camera shall have no less than 2560(H) x 1440(V) pixels.