HP NC110T 434905-B21 用户手册

产品代码
434905-B21
下载
页码 7
The HP NC110T is a cost-effective Gigabit Ethernet server adapter that features single-port, copper, single lane (x1) PCI Express
capability, with 48KB onboard memory that provides 10/100/1000T auto-negotiated speed and duplex. Designed with ProLiant
server needs in mind, it offers these server features: Cold boot Wake-on-LAN (WOL), PXE, Jumbo Frames (9K), Large Send Offload
(LSO), TCP Checksum Offload, and includes brackets for both half (low profile) and full height server slots so that customers have
maximum flexibility using this server adapter with their ProLiant server.
The NC110T is based on the Intel 82572GI controller and supports these IEEE standards: 802.3, 802.3u, 802.3ad, and
802.3ab, 802.1x, 802.1Q and 802.1p. Validated by HP so that it meets the highest ProLiant standards and provides a seamless,
network solution that is integrated with HP SmartStart, Insight Manager, networking software, firmware, and agents. NIC teaming
drivers are available for all major operating systems along with teaming utilities, multiple VLAN tagging, and a configuration GUI.
Models
HP NC110T PCI Express Gigabit Server Adapter
NOTE: Does not support Windows 2000.
434905-B21
Kit Contents
HP NC110T PCI Express Gigabit Server Adapter PCA ships with a standard height bracket
attached to it. (The low profile bracket is included in the clamshell that the PCA ships in.)
1.
Product Warranty statement and the Quick Install Card (QIC).
2.
QuickSpecs
HP NC110T PCI Express Gigabit Server Adapter
Overview
DA - 12664   Worldwide QuickSpecs — Version 15 — 9.14.2009
Page 1