Fujitsu MAT3300FC 用户手册
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
Fibre Channel Interface
1-100
C141-C008
Receive SCSI command from the initiator
–Parallel ESI
Enclosure DLY
ESI Phase
SEL_ID
DISCOV. COMMAND
READ/WRITE
SEL_ID
max 1
µs
max 1
µs
Figure 1.55 Enclosure service data transfer protocol
Detail of DISCOV. (discovery) phase is shown in Figure 1.56.
This process is executed every time when -Parallel ESI signal is asserted.
The target of DISCOV. phase is that the drive acknowledges the enclosure can
operate as SFF8067 mode.
operate as SFF8067 mode.
If the enclosure cannot operate as SFF8067, the drive performs one of the
following.
following.
a) assuming that the enclosure can operate as SFF8045 w/o Parallel ESI, then
transmits sense data to the initiator.
; case 1 in Figure 1.56.
b) assuming that the enclosure can operate as SFF8067, then transmits sense
data to the initiator.
; case 2 in Figure 1.56.