Fujitsu MAT3300FC 用户手册
Command Specifications
4-16
C141-C008
Table 4.11 READ CAPACITY data
Bit
Byte
Byte
7 6 5 4 3 2 1 0
0
Logical Block Address (MSB)
1
Logical Block Address
2
Logical Block Address
3
Logical Block Address (LSB)
4
Block Length (MSB)
5 Block
Length
6 Block
Length
7
Block Length (LSB)
4.1.4 MODE SELECT (15)
Bit
Byte
Byte
7 6 5 4 3 2 1 0
0 X‘15’
1 0 0 0 PF 0 0 0 SP
2 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4
Parameter List Length
5 0 0 0 0 0 0 0 0
This command performs setting and changing of each type of parameter related to
disk drive physical attributes, data format, timing of FC interface transferring
processing and error recovery procedures, etc. The INIT can know the types of
parameters, the current settings of each parameter and the types of parameters
which can be changed, and the ranges for such changes, etc. by using the MODE
SENSE or MODE SENSE EXTENDED command.
disk drive physical attributes, data format, timing of FC interface transferring
processing and error recovery procedures, etc. The INIT can know the types of
parameters, the current settings of each parameter and the types of parameters
which can be changed, and the ranges for such changes, etc. by using the MODE
SENSE or MODE SENSE EXTENDED command.
The data (MODE SELECT parameters) transferred from the INIT to the IDD by
this command, are configured from a "Header," "Block Descriptor" and one or
more "Page Descriptors" which describe each parameter, each of which will be
explained later.
this command, are configured from a "Header," "Block Descriptor" and one or
more "Page Descriptors" which describe each parameter, each of which will be
explained later.