Fujitsu MAT3300FC 用户手册
1.2 Information Transmitted on the Loop
C141-C008
1-9
OX_ID;
Originator Exchange Identifier, assigned by the originator of an
exchange. This value is similar to Queue Tag in SCSI and must
be unique for a pair between the initiator and the drive.
exchange. This value is similar to Queue Tag in SCSI and must
be unique for a pair between the initiator and the drive.
RX_ID;
Responder Exchange Identifier, generated by the responder for
an exchange.
an exchange.
OFFSET;
Defines the relative displacement of the first byte of the payload
from the base address of the command.
from the base address of the command.
c) Payload; Data field, must be multiple of four bytes.
–
If the frame is FC-4 Device Data, the payload has SCSI CDB,
Read/Write Data or status/sense information.
Read/Write Data or status/sense information.
–
If the frame is Link Data, the payload has control information for the
drive or the response data to the initiator.
drive or the response data to the initiator.
d) CRC; Calculates without including SOF and EOF delimiters.
e) EOF; End of frame indicates the end of a frame.
*1: R_CTL (Routing Control)
The high order bits (bits 31-28) specify the frame type as follows.
0000 = FC-4 Device_Data frame
0010 = Extended Link_Data frame
0011 = FC-4 Link_ Data frame
0100 = Video_ Data frame
1000 = Basic Link_ Data frame
1100 = Link_ Control frame
Others = Reserved
The low order bits (bits 27-24) specify the Information field values.
Those values have the meaning with combination with the value of the high
order bits (31-28).
order bits (31-28).