Equip Pocket KVM Switches USB + Audio 331512 用户手册

Manual_

Page 5

www.equip-info.net

3. Easy Operation

There are three methods to control your KVM Switch for PC and Audio/Mic 

channel selection: 

using (1) the face-panel push button

(2) a hotkey sequence

(3) the KVM Switcher Software. 

3.1. Face-panel buttons

The face-panel button allows you a direct control over KVM switching operation. Simply

press the button to switch to the corresponding PC port (and audio/mic channel, if binding

is enabled). By default, PC port switching and audio/mic port switching are bound toget-

her. 

You can use the face-panel button to switch to an empty port that is not connected with

any computer. Normally, if you use keyboard hotkeys or the KVM Switcher software, you

will not be able to switch to an empty port.

3.2. Keyboard Hotkeys

•  User-definable hotkeys for PC selection

Hotkey Sequenz = Ctrl + Alt + [Command Key]

Please refer to next section for keys that are qualified to be used as a command key

•  Universal hotkey for PC toggle-switching

Both the universal hotkey, ScrLk + ScrLk and the user-definable hotkey, Ctrl + Alt + [com-

mand key] WILL NOT allow you to switch to an empty port that is not connected with any

computer. To force your KVM to switch to an empty port, just press the face-panel button

to switch.

Universal Hotkey Sequenz = ScrLk + ScrLk

For other operating systems on PC such as Linux, you can still use this special hotkey to

facilitate PC switching. This special hotkey is not available for Mac. HOWEVER, you can

press button to switch in any case.