EVGA 03G-P4-2888-KR 用户手册

6

On some EVGA graphics cards, it is possible to link multiple graphics cards up for improved performance, this is 
called SLI. To install multiple cards in SLI, follow the below instructions, please note that in SLI setups both cards 
must be the same model. For a video overview of setting up SLI, please visit 

When you boot up your computer for the first time after installing your new graphics card, Windows may detect a 
new display device and attempt to install the drivers. If it gives you the option to cancel, please do so, otherwise 
wait for Windows to complete the installation (a reboot may be necessary).

After this process has been completed, it is necessary to install the recommended drivers for your graphics card. 
To begin, insert the EVGA Installation DVD/CD and allow the autorun driver installation menu to start.

Install your first GeForce graphics card 
into the Primary PCI Express x16 slot.

The above SLI bridges are included with your SLI ready motherboard depending on the configurations that it supports. In order for your 
SLI setup to work properly you would need to use the appropriate bridge based on the number of cards you are connecting.

2-way SLI

2-way SLI: Install your second GeForce 
graphics card in to the outer PCI Express 
x16 slot. Connect the two cards together 
using the 2-way SLI bridge connector that 
came with your SLI-ready motherboard.

3-way SLI

3-way SLI: Install the third GeForce card into 
the middle or secondary PCI Express 
slot on the motherboard. Connect the 
GeForce cards together using the 3-way 
SLI bridge connector that came with your 
SLI-ready motherboard.

4-way SLI

English