Bosch EVU-2082/95 EVU-2082/95-WHT 用户手册
产品代码
EVU-2082/95-WHT
Optional Accessories
The input panel accepts the optional EVU-TK60 60-W 70.7/100-V input transformer,
with taps at 60, 30, 15, and 7.5 W (70.7 V), 60, 30, and 15 W (100 V), and an
8-ohm pass through. The input panel also accepts the optional EVU-CDNL4 cover,
equipped with dual Neutrik Speakon® NL4 chassis connectors for quick-disconnect
applications such as front fill.
with taps at 60, 30, 15, and 7.5 W (70.7 V), 60, 30, and 15 W (100 V), and an
8-ohm pass through. The input panel also accepts the optional EVU-CDNL4 cover,
equipped with dual Neutrik Speakon® NL4 chassis connectors for quick-disconnect
applications such as front fill.
EVU Series
Mechanical Aspects and Rigging
Each EVU loudspeaker has six M8 threaded
suspension points. One point on each end is
used with the supplied U-bracket. The bracket
allows full, unobstructed rotation of the system
(330° if the optional EVU-TK60 70.7/100-V
transformer kit is installed).
suspension points. One point on each end is
used with the supplied U-bracket. The bracket
allows full, unobstructed rotation of the system
(330° if the optional EVU-TK60 70.7/100-V
transformer kit is installed).
Four points located on the back of each
system accept OmniMount 30.0 series
brackets (single-woofer systems) and
60.0 series brackets (dual-woofer systems).
The OmniMount brackets offer very flexible
vertical tilt and horizontal pan around a single
point at the rear of the loudspeaker.
system accept OmniMount 30.0 series
brackets (single-woofer systems) and
60.0 series brackets (dual-woofer systems).
The OmniMount brackets offer very flexible
vertical tilt and horizontal pan around a single
point at the rear of the loudspeaker.
EVU1062
EVU2082
EVU-TK60
EVU-CDNL4
Input Panel
Rear-mounted input panels are equipped with
a four-pin Phoenix Euroblock screw-terminal
connector, which accepts up to 10-gauge wire
(AWG) and allows convenient daisy chaining of
multiple systems.
a four-pin Phoenix Euroblock screw-terminal
connector, which accepts up to 10-gauge wire
(AWG) and allows convenient daisy chaining of
multiple systems.