StarTech.com HDMI over Cat5 / Cat6 Receiver for ST424HDBT – 230ft (70m) – 1080p STHDBTRX 用户手册

230ft (70m) over Cat5e/6 cabling. One STHDBTRX receiver unit is required for each individual remote display.

Together with the ST424HDBT, the CAT5 HDMI receiver works to create a digital signage solution that
eliminates the expense and hassle of running multiple devices with an HDMI matrix switch and extender in one
clutter-free system. Because the signal is extended using standard Cat5e/6 Ethernet cables with RJ45
connectors, you can use your existing cabling infrastructure, without the additional cost of special cabling or
connectors.

For remote source operation, the HDMI receiver can also extend an Infrared signal from a remote control to
operate either the display or the video source from either side or system, using the included IR extender and
receiver cables.

The STHDBTRX is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Connect 4 different HDMI sources to 4 different displays, in different locations around a large building
such as a shopping center, school, or hospital
Choose which video sources are displayed and switch between sources at any time
Place the displays in a convenient viewing area, while the HDMI source equipment is placed elsewhere in
a separate, secured environment

www.startech.com
1 800 265 1844