Humminbird PiranhaMAX 175 408640-1 用户手册
产品代码
408640-1
2. Assemble the Base and Handle
In this procedure, you will install the PiranhaMAX mount and handle to the
base of the portable case.
base of the portable case.
1. Turn the base upside down. Punch
out the mounting holes labeled “C”
with a hammer and a screwdriver (or
an awl) as shown in the illustration
Punching Holes.
with a hammer and a screwdriver (or
an awl) as shown in the illustration
Punching Holes.
2. Turn the base right side up. Line up
the PiranhaMAX mount with the
holes you punched out in step 1.
holes you punched out in step 1.
3. Using a socket wrench and a Phillips
screwdriver, secure the PiranhaMAX
mount to the base with the four
included 3/4” screws, lock washers,
and nuts. Hand tighten only!
mount to the base with the four
included 3/4” screws, lock washers,
and nuts. Hand tighten only!
Attaching the Mount to the Base
PiranhaMAX Tilt
and Swivel Mount
Base
Figure 30
Punching Holes
Figure 29
22
PiranhaMAX Portable Case Assembly