Humminbird PiranhaMAX 175 408640-1 用户手册
产品代码
408640-1
Power ON and OFF
Use the following instructions to power on your PiranhaMAX unit:
• Power On: Press the POWER/MENU key until
the PiranhaMAX powers on, then release the
key.
key.
• Start-Up Menu: When the PiranhaMAX powers
on, the Start-Up menu temporarily appears.
From this menu, select either Normal or
Simulator.
From this menu, select either Normal or
Simulator.
• For on the water use, select Normal.
• To learn how to use the system with
simulated data, select Simulator.
• Power Off: Press and hold the POWER/MENU
key until the unit powers off.
NOTE: International units powered on for the first time will first display setup menu
options such as Language, Units - Distance, Units - Speed, etc. for initial system setup.
options such as Language, Units - Distance, Units - Speed, etc. for initial system setup.
NOTE: If Simulator Mode is selected from the Start-Up Menu and a transducer is
plugged in, some menu setting changes will be saved in memory even after the unit is
powered down. Menu setting changes will not be saved when a transducer is not
connected.
plugged in, some menu setting changes will be saved in memory even after the unit is
powered down. Menu setting changes will not be saved when a transducer is not
connected.
To Make a Selection from the Start-Up Menu:
1. Press the UP or DOWN Arrow key to select Normal or Simulator.
2. Press the CHECK/ENTER key to confirm your selection.
NOTE: See Key Functions and How to Use the Menu System for more information.
35
Power ON and OFF