PCT PCTTRS6 PCT-TRS-6 产品宣传页
产品代码
PCT-TRS-6
TM
1715 West Sunrise Boulevard | Gilbert, AZ 85233-5032 | USA
Tel +1.480.813.0925 | Fax +1.480.545.1080 | www.pctinternational.com
Specifications subject to change without notice. US Patent No. 6,712,631
2008.12 / 20081211 | © 2005-2008 PCT International, Inc.
CONNECTOR
CUTAWAY
PART NUMBER
DESCRIPTION (Torque Retaining)
PCT-TRS-6 ....................Universal Compression Connector, Series 6, 60% Thru Quad
PCT-TRS-59 ..................Universal Compression Connector, Series 59, 67% Thru Quad
PCT-TRS-59 ..................Universal Compression Connector, Series 59, 67% Thru Quad
PCT-TRS-6
Competitor A
40.0
13.2
Fail
Competitor B
40.0
11.0
Fail
Competitor C
40.0
14.0
Fail
Competitor D
40.0
14.2
Fail
Competitor E
40.0
13.2
Fail
PCT-TRS-6L 40.0
36.0
Pass
Connector
Tested
“Loosening Torque” Test Results
Tested per Bellcore GR-1503-CORE specification
Note: Five (5) connectors of each type tested. The connectors were installed onto
CommScope F660BVV 60% bi-shield drop cable per each manufacturer’s instructions. The
connectors were then installed on 8-way splitters and each was torqued to 40 in. lbs. The
connector splitter assemblies were then temperature cycled with humidity per the following
schedule: 14 12-hour temperature cycles from +20 to +60° C and returned to +20° C with
95% humidity at the high temperature point. Temperature extremes were maintained for 3
hours.
CommScope F660BVV 60% bi-shield drop cable per each manufacturer’s instructions. The
connectors were then installed on 8-way splitters and each was torqued to 40 in. lbs. The
connector splitter assemblies were then temperature cycled with humidity per the following
schedule: 14 12-hour temperature cycles from +20 to +60° C and returned to +20° C with
95% humidity at the high temperature point. Temperature extremes were maintained for 3
hours.
Tightened To
(in / lbs)
Torque Required for Removal
avg (in / lbs) after temperature cycling
Pass/Fail
PARAMETER SPECIFICATION
REQUIREMENT
TRS
RESULTS
Cable Retention
ANSI/SCTE 99 2004
> 40 lbs pull force
Pass
Chemical Resistance
BLCR GR-1503-CORE 4.7
No cracking or swelling
Pass
Corrosion Resistance
BLCR GR-1503-CORE 3.2.1
1,000 hrs salt spray
Pass
Tightening Torque
ANSI/SCTE 88 2004
Tightened to 60 in/lbs without damage
Pass
< 0.05 dB to 350 MHz,
Insertion Loss
SCTE IPS-TP-201
< 0.1 dB to 700 MHz,
Pass
< 0.2 dB to 1 GHz
Installation Force
ANSI/SCTE 73 2002
< 20 lbs maximum insertion
Pass
Loosening Torque
BLCR GR-1503-CORE 4.2
≥ 30 in/lbs after temperature cycling
Pass
Moisture Migration
ANSI/SCTE 60 2004
No dye penetration after 5 days of
Pass
temperature
cycling
Ozone Degradation
BLCR GR-1503-CORE 4.1
70 hours exposure
Pass
Return Loss
ANSI/SCTE 04 1997
> 30 dB to 1 GHz Pass
ANSI/SCTE 05 1999
Salt Fog
ASTM B 117 / SCTE IPS-TP-406 > 30 dB return loss to 1 GHz
Pass
Shielding Effectiveness ANSI/SCTE 48-2 2003
> 100 dB to 300 MHz, > 90dB to 1GHz
Pass
Temperature Cycling
BLCR GR-1503 4.1
> 40 lbs. pull force after temperature
Pass
with humidity cycling
UV Degradation
BLCR GR-1503-CORE 4.8
UV resistant after 7 days
Pass
Vibration BLCR
GR-1503-CORE 4.6
> 32 in/lbs loosening torque after vibration Pass
DC Contact Resistance SCTE IPS-TP-405
< 5 milliohms
Pass
Outer Conductor
Specifications are subject to change without notice.
Dual o-rings provide complete
weather-sealed protection
without the use of separate “F”
port seal rings
weather-sealed protection
without the use of separate “F”
port seal rings
Special o-ring cavity
permits full metal-
to-metal contact
between “F” port and
support mandrel as
nut is tightened
permits full metal-
to-metal contact
between “F” port and
support mandrel as
nut is tightened
Patented dual 360° compression rings
provide enhanced cable retention,
excellent shielding effectiveness and
protection from moisture ingress
provide enhanced cable retention,
excellent shielding effectiveness and
protection from moisture ingress
One-piece, all brass
construction
construction
Visible indicators for proper
compression activation
compression activation
Standard cable preparation:
1/4 in. - 1/4 in.
1/4 in. - 1/4 in.
CONNECTOR
TEST
ORDERING
INFORMATION
SPECIFICATIONS