Mitel Networks 5310 IP 50005321 产品宣传页

QUICK REFERENCE GUIDE 

M Mitel (design) is a registered trademark of Mitel Networks Corporation.  © 2010, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.

Mitel

5310 IP Conference Unit

The Mitel 5310 Conference Unit comprises a saucer and a Mitel 5235/5324/5330/5340/5360 IP 
Phone. 

The diagram below shows a 5340 IP Phone connected to the 5310 Conference Unit (for 

illustrative purposes only).

The Conference Controller phone application provides the functionality required to operate the 
5310 Conference Unit. If the 5310 Conference Unit is not connected to the phone, the 
Conference Controller application is not available.

The 5324 IP Phone does not contain the Conference Controller application. Use the 

phone’s dialpad directly. The 5324 IP Phone will acitvate the 5310 Conference Unit if it is 
connected to the phone.

Use your finger (or the stylus supplied with the 5235 IP Phone) to select Conference Controller 
Touch Screen options.

You cannot use the headset when using the 5310 IP Conference Unit.

For information on using the 5310 Conference Unit with the Mitel 5220/5224 IP Phone, see the 
reverse side.

For the 5235 IP Phone:
• Press 

 on the Applications shutter label to 

open the shutter.

• Press the Conference Controller label

For the 5324 IP Phone:
• Press the 

 key, or start dialing

For the 5330/5340 IP Phone:
• Press the blue 

 key

• Press 

For the 5360 IP Phone:
• Press the 

 icon (

)

You can also program a key to 

quickly launch the Conference Controller 
application. Refer to the individual Mitel IP 
Phone user guide.

• Press 

. The Directional 

LED on the conference unit turns on when 
the Conference Unit is on.

• To turn off the conference unit when using 

the 5324 IP Phone, hang up; or press the 

 key and hang up.

Turning the 5310 Conference Unit 

off will terminate the active call. To continue 
the call either pick up the handset or press the 

 key on the phone.

• Press  the 

 or 

 

keys on the phone repeatedly.

• Press 

. The Directional LED turns 

amber when mute is on.

When only one individual is speaking in a 
conference, use Presentation Mode to 
minimize extraneous noise. Disable 
Presentation Mode to allow other speakers to 
be heard.

• Turn the Conference Unit on.
• Press 

. The Directional 

LED flashes when Presentation Mode is 
on.

For the 5324 IP Phone, Presentation 

mode is available only when the optional 
mouse is connected to the conference unit.

 For more detailed information on how to use other touch screen buttons and 

features of the Mitel IP Phones, refer to the individual user guides available at 
www.edocs.mitel.com, or contact your Administrator.