Kingston Technology 256MB 133MHz Non-ECC CL3 SODIMM KVR133X64SC3/256 数据表

产品代码
KVR133X64SC3/256
下载
页码 1
Memory Module Specification
0.000
0.787
1.250
0.000
1.141
2.660
R .078
R .030
ASSY USA
16M x 16
TSOP
16M x 16
TSOP
16M x 16
TSOP
16M x 16
TSOP
16M x 16
TSOP
16M x 16
TSOP
16M x 16
TSOP
16M x 16
TSOP
DESCRIPTION:
This document describes ValueRAM's CL3 32M x 64-bit (256MB) SDRAM (Synchronous
DRAM) PC133 Small Outline DIMM memory module. The components on this module
include eight 16M x 16-bit (4M x 16-bit x 4 Bank / PC133 components) 4K Refresh SDRAM
in TSOP packages. This 144-pin SODIMM uses gold contact fingers and requires +3.3V.
The electrical and mechanical specifications are as follows:
FEATURES:
CLK Cycle Time (t
CC
)
min. = 7.5ns (CAS Latency = 3) / max. = 1000ns
Row Cycle Time (t
RC
)
65ns
CLK to Output (tS
AC
)
max. = 5.4ns (CAS Latency = 3)
Single Power Supply of
+3.3V (+/- .3V)
Power
2.221 W (operating)
UL Rating
94 V - 0
Document No. VALUERAM0105-001.A00
03/06/02
KVR133X64SC3/256
PC133 SDRAM 144-Pin CL3
SODIMM Memory Module
Figure 1: KVR133X64SC3/256 144-Pin SDRAM Module
Note: All measurements are in decimal inches.
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).