Cisco V.35 Cable DTE Male CAB-V35MT 用户手册

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
V.35 Speed and Distance Limitations
CAB−V35MT Serial Cable Assembly
V.35 DTE Cable Pinouts (DB−60 to 34−Pin)
CAB−V35FC Serial Cable Assembly
V.35 DCE Cable Pinouts (DB−60 to 34−Pin)
Related Information

This document explains the V.35 serial cable assembly and pinouts.

There are no specific requirements for this document.

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

The table here lists the different V.35 speed and distance limitations:

 Caution: The EIA,TIA−449 and V.35 interfaces support data rates up to 2.048 Mbps. Cisco advices

not to exceed this maximum as it could result in loss of data.

Data Rate (Baud)

Distance (Feet)

Distance (Meters)

2400

4,100

1,250

4800

2,050

625