Eminent 3.5" Network hard disk enclosure EM4060 产品宣传页
产品代码
EM4060
Postbus 276
6160 AG Geleen
The Netherlands
EM4000 10/100Base-TX To 100Base-FX Media Converter (SC)
1 Converts Ethernet over to copper to Ethernet over Þ ber.
2 Converts your conventional 10/100Base-TX signal to an Ethernet signal over 100Base-FX.
3 This media converter allows you to convert the conventional 10/100Base-TX signal to 100Base-FX.
This fail-safe solution ensures high quality signal transports over great distances without having to worry about
interference. The EM4000 offers auto-negotiation and automatic cross-over detection on each TP-port.
This media converter is also transparent to 802.1Q VLAN tagged packets. The professional solution in expanding
networks.
Key features
- Converts speed and media type
- Supports full wire speed conversion
- Supports 10/100M dual speed on TP connections
- Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
- Link fault pass through function
- Transparent to 802.1Q VLAN tagged packets
- Far End Fault function on FX port
- Supports desktop, wall, and center chassis mounting
- Supports center chassis management
- Low power consumption
- Supports wide range of Þ ber options - ST, SC, MT-RJ, VF-45, single SC (depending on converter type)
Multi-mode Þ ber, Single mode duplex Þ ber, Single Þ ber
Short reach, medium reach, and long reach Þ ber connections
- Provides user accessible settings for TP port conÞ guration, disabling link fault pass through function
- Provides optional user-inaccessible settings for speciÞ c system applications
Technical data
TP Port
: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Shielded RJ-45 jacks with Auto MDI/MDI-X detection
Auto-negotiation for speed and duplex auto detection
Forced mode with speed and duplex settings
Speed for 10Mbps or 100Mbps
Full-duplex or half-duplex support
FX Port
: IEEE 802.3u 100Base-FX compliant
Forced 100Mbps, Full duplex (factory default)
Far end fault Function
Cable
: Cat. 5 or higher UTP cable (100 meters max.)
MMF - 62.5/125µm, 50/125µm (2000 meters max.)
LEDs
: Power status
TP Ports
: Link/Act, Speed, Duplex status
FX Ports
: Link/Act status, Fiber signal detected
ConÞ guration Switches
Accessible settings : TP port mode, TP port duplex, TP port speed,
Link fault pass through
Packet Size
: Up to 1522 bytes for store-and-forward mode
No packet size limit for smart-forward mode (100-to-100)
Environment
: Operating Temperature: -5OC to 40OC
Dimensions
: 108 x 72.5 x 23 mm (WxDxH)
Operating voltage
: +5V ~ +12VDC (+/-5%) (Device DC Input)
Power Consumption
: 2 watts. (max.)
SpeciÞ cation of Þ ber optical transceiver of EM4001
Connector
Fiber cable
Wavelength TX Power
RX sensitivity
SC Duplex MMF -62.5/125 µm, 50/125 µm 1310nm
-19 ~ -14dBm -31dBm
EM 4000
EM4000 10/100Base-TX To 100Base-FX Media Converter (SC)
1 Converts Ethernet over to copper to Ethernet over Þ ber.
2 Converts your conventional 10/100Base-TX signal to an Ethernet signal over 100Base-FX.
3 This media converter allows you to convert the conventional 10/100Base-TX signal to 100Base-FX.
This fail-safe solution ensures high quality signal transports over great distances without having to worry about
interference. The EM4000 offers auto-negotiation and automatic cross-over detection on each TP-port.
This media converter is also transparent to 802.1Q VLAN tagged packets. The professional solution in expanding
networks.
Key features
- Converts speed and media type
- Supports full wire speed conversion
- Supports 10/100M dual speed on TP connections
- Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
- Link fault pass through function
- Transparent to 802.1Q VLAN tagged packets
- Far End Fault function on FX port
- Supports desktop, wall, and center chassis mounting
- Supports center chassis management
- Low power consumption
- Supports wide range of Þ ber options - ST, SC, MT-RJ, VF-45, single SC (depending on converter type)
Multi-mode Þ ber, Single mode duplex Þ ber, Single Þ ber
Short reach, medium reach, and long reach Þ ber connections
- Provides user accessible settings for TP port conÞ guration, disabling link fault pass through function
- Provides optional user-inaccessible settings for speciÞ c system applications
Technical data
TP Port
: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Shielded RJ-45 jacks with Auto MDI/MDI-X detection
Auto-negotiation for speed and duplex auto detection
Forced mode with speed and duplex settings
Speed for 10Mbps or 100Mbps
Full-duplex or half-duplex support
FX Port
: IEEE 802.3u 100Base-FX compliant
Forced 100Mbps, Full duplex (factory default)
Far end fault Function
Cable
: Cat. 5 or higher UTP cable (100 meters max.)
MMF - 62.5/125µm, 50/125µm (2000 meters max.)
LEDs
: Power status
TP Ports
: Link/Act, Speed, Duplex status
FX Ports
: Link/Act status, Fiber signal detected
ConÞ guration Switches
Accessible settings : TP port mode, TP port duplex, TP port speed,
Link fault pass through
Packet Size
: Up to 1522 bytes for store-and-forward mode
No packet size limit for smart-forward mode (100-to-100)
Environment
: Operating Temperature: -5OC to 40OC
Dimensions
: 108 x 72.5 x 23 mm (WxDxH)
Operating voltage
: +5V ~ +12VDC (+/-5%) (Device DC Input)
Power Consumption
: 2 watts. (max.)
SpeciÞ cation of Þ ber optical transceiver of EM4001
Connector
Fiber cable
Wavelength TX Power
RX sensitivity
SC Duplex MMF -62.5/125 µm, 50/125 µm 1310nm
-19 ~ -14dBm -31dBm
EM 4000
EXTERNAL CASE
EM4060
Network Harddisk Enclosure
LAN enclosure for 3.5” Harddisk!
With the ever increasing speed of Internet connections, you will
most certainly face a lack of space for storing your valuable film
collection, music and other multi-media files. Extra space would
be welcome, especially when multiple users use the same network.
Of course you can always set-up one pc as a server, but realise it
has to be on 24/7.
Why not sue the Eminent EM4060 network hard disk enclosure? The
EM4060 is the perfect hard disk enclosure for all 3.5” hard disks.
You connect the EM4060 to a router or ADSL modem in order to
share your files. From that moment on, the users in your account
list have access all of the time and every time via the Internet.
Better yet: wherever you are, you can have full access to your
own files. How useful! The EM4060 is a more than flexible solution
that really completes your network.
Aluminium network harddisk enclosure for
3.5” harddisk
10/100Mbps RJ45 Fast Ethernet connection
With built-in FTP server
3.5” harddisk
10/100Mbps RJ45 Fast Ethernet connection
With built-in FTP server
Full aluminium casing with built-in cooling fan
©2007 EMINENT - JANUARY
SYSTEM REQUIREMENTS:
Pc fitted with installed networking adapter
Windows ME/2000/XP
EAN 8716065203332
LAN
ENCLOSURE
FOR
3.5"
HARDDISK
10/100
MBPS
ALUMINIUM
CASING