Enlogic EN1119 数据表
The Critical Component
Model: EN1119
Overview
The EN Series Power Distribution Unit (PDU) distributes power to
devices in the rack and offers real-time metering and network
monitoring of power loads for overload avoidance, capacity &
load balancing, and energy use optimization. It can be monitored
through Web, Telnet, SNMP, or SSH interfaces. The equipment
can be only be used with ITE equipment (e.g. inside server
rooms).
Features
1: Toolless mounting.
The Rack PDU has two toolless mounting pegs for 0 U mounting
capabilities in a rack or enclosure.
2: Outlets.
This EN Series PDU has thirty-six (36) C13 outlets and six (6) C19
outlets.
3: OLED.
Allows for user to view settings and monitor measurements of the
PDU.
4: Hot Swappable Network Management Card
5: Input Buttons.
5: Input Buttons.
Allow user to navigate and control the content of the OLED
display.
6: Ethernet connection port.
Allows for IP network communication.
7: Rs485-2 Port.
Outbound communications port for connecting additional PDU to
an Rs-485 daisy chain group.
8: Sensor Ports.
Connection ports for external environmental sensors such as
temperature, humidity, dry contact, door status, and fluid leak.
9: USB Port.
Allows for data transfer using a USB flash drive.
10: Serial+ Rs485-1 Port.
Allows for serial communication connection or IN
communications port for connecting the PDU to an existing Rs485
daisy chain group.
11: Power Cord.
Field rewireable, top or front cord option. 1m,3m,5m cord
lengths available.
12: Slim Profile Design
EN Series Product Data Sheet
2
1
11
3
6
8
7
Reset
Unit Status
Scroll
Menu
Select
Setup
Alarms
Power
Sensors
Sensor-2
Sensor-1
Rs485-2
Serial+Rs485-1
USB
Ethernet
9
10
4
5
9
12