Philips 50PUT8509 50PUT8509/79 用户手册
产品代码
50PUT8509/79
the hue bridge with the TV. Do this within 30 seconds. The TV
will confirm if a hue bridge is linked to the TV.
3 - On this confirmation, select
will confirm if a hue bridge is linked to the TV.
3 - On this confirmation, select
OK and press OK.
With the Philips hue bridge linked to the TV, go to page
Hue
bulbs.
Hue bulbs
In the following step, you will select the
Philips hue bulbs that
have to follow the Ambilight.
You can select a maximum of 9 Philips hue bulbs for
Ambilight+hue.
You can select a maximum of 9 Philips hue bulbs for
Ambilight+hue.
To select the bulbs for Ambilight+hue…
1 - In the
Configure Ambilight+hue menu, select Hue bulbs and
press
OK.
2 - Mark the bulbs that have to follow the Ambilight. To mark a
bulb, select the bulb name and press
bulb, select the bulb name and press
OK.
3 - When you’re done, select the
OK button and press OK.
With the bulbs marked for Ambilight+hue, go to page
Configure bulb.
Configure bulb.
Configure bulb
In the following step, you will configure each
Philips hue bulb.
To configure each hue bulb…
1 - Select the bulb name in the
Configure Ambilight+hue menu
and press
OK. The bulb you selected is blinking.
2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the
correct setting of the
Angle will send the correct Ambilight
colour to the bulb. Press
(up) or (down) to adjust.
3 - Press
(right) to set the distance.
4 - Secondly, indicate the
Distance between the bulb and the
TV. The further away from the TV, the weaker the Ambilight
colour. Press
colour. Press
(up) or (down) to adjust.
5 - Press
(right) to set the brightness.
6 - Finally, set the
Brightness of the bulb. Press
(up) or
(down) to adjust.
7 - To stop configuring this bulb, select
7 - To stop configuring this bulb, select
OK and press OK.
8 - In the
Configure Ambilight+hue menu, you can select every
bulb and do the same.
9 - When all Ambilight+hue bulbs are configured, select
9 - When all Ambilight+hue bulbs are configured, select
Finish
and press
OK.
Ambilight+hue is ready for use.
You can always change the Ambilight+hue configuration later.
To change the configuration, press
To change the configuration, press
and select Setup > TV
settings > Ambilight > Ambilight+hue.
Immersion
With
Immersion, you can adjust the level of the Ambilight effect
for the Ambilight+hue bulbs.
To adjust the Ambilight+hue Immersion…
1 - Press
and select Setup and press OK.
2 - Select
TV settings > Ambilight > Ambilight+hue >
Immersion and press OK.
3 - Press
3 - Press
(up) or (down) to adjust.
4 - Press
, repeatedly if necessary, to close the menu.
Info
In
View configuration, you can consult the current
Ambilight+hue configuration. Which network you use, how
many bulbs are connected, etc.
many bulbs are connected, etc.
To view the current Ambilight+hue setup…
1 - Press
and select Setup and press OK.
2 - Select
TV settings > Ambilight > Ambilight+hue > View
configuration and press OK.
3 - Select the item you want to view and press
3 - Select the item you want to view and press
OK.
4 - Press
, repeatedly if necessary, to close the menu.
Advanced Ambilight settings
Wall colour
With
Wall colour, you can neutralise the influence of a coloured
wall on the Ambilight colours. Select the colour of the wall
behind the TV and the TV will modify the Ambilight colours to
appear as they are intended.
behind the TV and the TV will modify the Ambilight colours to
appear as they are intended.
To select the colour of the wall . . .
1 - Press
and select Setup and press OK.
2 - Select
TV settings > Ambilight > Advanced > Wall colour.
3 - Select the colour sample that matches the colour of the wall
behind the TV and press
behind the TV and press
OK.
4 - Press
, repeatedly if necessary, to close the menu.
TV switch off
With
TV switch off, you can set Ambilight to switch off
immediately or slowly fade out when you switch off the TV. The
slow fade out gives you some time to switch on the lights in
your living room.
slow fade out gives you some time to switch on the lights in
your living room.
To select the TV switch off . . .
1 - Press
and select Setup and press OK.
2 - Select
TV settings > Ambilight > Advanced > TV switch
off.
3 - Select
3 - Select
Fade out to off or Immediate switch off.
4 - Press
, repeatedly if necessary, to close the menu.
Lounge light mood
When the TV is on standby, you can switch Ambilight on and
create a Lounge light effect in your room.
create a Lounge light effect in your room.
67