Fantec SNT-135SATA-1 3.5" SATA HDD Mobile Rack Black 2011 产品宣传页
产品代码
2011
◆
Magic Handle—Auto In/Out (see picture C)
1. Power LED: Power on, LED indicates Green. (see picture D)
2. Amber LED blinking while HDD access.
2. Amber LED blinking while HDD access.
Picture C
Picture D
◆
Back View & Access LED wiring (Picture E & F)
Picture E Picture F
1. 15pin Serial ATA Power connector (Pic.E-1)
If your power is from SATA 15pin connector, connect it to the 15pin connector
2. 7pin Serial ATA Signal connector (Pic.E-2)
3. 4pin Power connector (Pic.E-3)
If your power is not from SATA 15pin connector, then, use the 4pin power
connector; the 4pin power will automatically be converted to SATA power.
4. HD LED SWITCH (See Pic.E-4)
(The default setting is on the left, supporting SATA-II HD LED)
When the Switch is adjusted to the left, the setting supports SATA-II HD LED;
When the Switch is adjusted to the right, the setting supports SATA-I HD LED, but
requiring external HD Access LED wiring (See Picture F).
When the Switch is adjusted to the left, the setting supports SATA-II HD LED;
When the Switch is adjusted to the right, the setting supports SATA-I HD LED, but
requiring external HD Access LED wiring (See Picture F).
5. External HDD Access pin connections--
HDD access connection (Note: “+” and “-“ position). See it from motherboard
manual.
manual.
How to connect (See Picture F)
Connect to pins on the motherboard (wire white color is “-“), (see picture F-A)
HD LED (to the computer LED), (see picture F-B)
Connect to HDD pins on the mobile rack (see picture F-C, picture E –5).
Connect to HDD pins on the mobile rack (see picture F-C, picture E –5).