ABUS FU8200 产品宣传页
Secvest 2WAY Wireless Info Module
Art. no. FU8200
• Provides information on Secvest 2WAY status
• 8 LED indicators
• Different signal and alarm tones
• Integrated piezo signal generator
• Supplied externally with 12 V
• 8 LED indicators
• Different signal and alarm tones
• Integrated piezo signal generator
• Supplied externally with 12 V
The wireless info module is an optional accessory for the Secvest 2WAY. Via an LED display and various acoustic
signals, it notifies the alarm system of all processes and statuses. You can read the following system statuses
from the 8 LEDs of the info module:
Voltage displayReception of a valid signalStatus of the sub-section to which the control unit is assigned
(armed/disarmed) Information available after resetStatus of the sub-section to which the control unit is assigned
(internally armed/disarmed)Open zones available/the Secvest is in installer modeIf the input or output delay time
is runningAn alarm is triggeredYou can learn the following statuses from the acoustic signals of the internal Piezo
signal generator:
Fault: The system cannot be armedDuring the output delay, a zone has been opened/closedInput delay is
runningDoor chimePanel successfully armedTeach-in signal receivedInstaller mode exitedIn addition, the internal
Piezo sounder provides an alarm with up to 110 dB if triggered. The distance from the wireless info module to the
alarm panel can be up to 100 meters.
signals, it notifies the alarm system of all processes and statuses. You can read the following system statuses
from the 8 LEDs of the info module:
Voltage displayReception of a valid signalStatus of the sub-section to which the control unit is assigned
(armed/disarmed) Information available after resetStatus of the sub-section to which the control unit is assigned
(internally armed/disarmed)Open zones available/the Secvest is in installer modeIf the input or output delay time
is runningAn alarm is triggeredYou can learn the following statuses from the acoustic signals of the internal Piezo
signal generator:
Fault: The system cannot be armedDuring the output delay, a zone has been opened/closedInput delay is
runningDoor chimePanel successfully armedTeach-in signal receivedInstaller mode exitedIn addition, the internal
Piezo sounder provides an alarm with up to 110 dB if triggered. The distance from the wireless info module to the
alarm panel can be up to 100 meters.
Page 1 of 2
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 12/2014