British Telecom 036263 用户手册

Before you wall-mount your 
BT Converse 1300, check that you
are not drilling into any hidden
wiring or pipes.

1. Unclip stand from the base of the phone and remove it. 

Re-route the telephone line cord towards the bottom of
the phone.

2. Drill two holes in the wall 75-80mm vertically apart using

an 8mm drill bit. 

3. Insert the wall plugs if necessary then insert the screws

leaving about 5mm protruding from the wall on which to
hang the phone. 

4. Rotate the handset hook 180º so that it sticks upwards.

This holds the handset in place when wall-mounted. 

5. Slot the holes on the back of the base over the screw

heads and gently pull the phone down to make sure it is
securely in place.

Wall mounting your phone

If you need to leave the phone
whilst on a call, hang the handset
on the handset park at the top 
left-hand side of the base.

32