Moxa M-1451 用户手册
www.moxa.com email: info@moxa.com
5-5-26
www.moxa.com email: info@moxa.com
Remote Monitoring Solutions
5-26
5
Remote I/O
>
ioLogik 4000 Modular Remote I/O
ioAdmin allows you to configure and monitor ioLogik 4000 modular
I/O servers remotely. ioAdmin automatically detects the installed
ioLogik Ethernet I/O server and presents the installation sequence
of the I/O modules. ioAdmin also detects and generates a Modbus
address table, which can be printed or stored on a computer for
SCADA software configuration.
I/O servers remotely. ioAdmin automatically detects the installed
ioLogik Ethernet I/O server and presents the installation sequence
of the I/O modules. ioAdmin also detects and generates a Modbus
address table, which can be printed or stored on a computer for
SCADA software configuration.
The utility also allows you to:
1. Automatically search for installations
2. Look for help using online documentation
3. Generate reports of I/O combinations
What You See Is What You Install
!!
Easy-to-Use Windows Utility
Self-diagnostic Function for Digital Output Channels
Remote Confi guration
ioAdmin is a powerful, Windows-based configuration and management
tool. You can use ioAdmin to modify the IP address, update
communication parameters, and configure all other settings easily.
In addition, ioAdmin can be used to configure ioLogik modular I/O
servers from a remote host. This means that ioLogik modular I/O
servers can be configured from anywhere over the Ethernet, which can
help reduce your operating expense.
tool. You can use ioAdmin to modify the IP address, update
communication parameters, and configure all other settings easily.
In addition, ioAdmin can be used to configure ioLogik modular I/O
servers from a remote host. This means that ioLogik modular I/O
servers can be configured from anywhere over the Ethernet, which can
help reduce your operating expense.
The M-2402, M-2403, M-2404, and M-2405 modules include a
self-diagnostic function to guarantee that the digital output signal is
monitored electronically. The hardware-monitored status is written to
self-diagnostic function to guarantee that the digital output signal is
monitored electronically. The hardware-monitored status is written to
the logic system, and you can obtain the actual digital output status
over the network when the software sends a command to the module.
This is all done internally, and configuration is not required.
over the network when the software sends a command to the module.
This is all done internally, and configuration is not required.
Although ioAdmin is the main configuration interface for ioLogik
servers, you can also check the following information using the
ioLogik server’s web console:
servers, you can also check the following information using the
ioLogik server’s web console:
• Network configuration
• Modular I/O
• Status of each channel
• Modular I/O
• Status of each channel
Check Remote I/O Status with a Web Browser