Adaptec 6805Q 2270700-R 用户手册

Chapter 10: Solving Problems

●

87

3

Copy the file AFU.exe (from the Adaptec Installation DVD) and the firmware image files 
(typically *.ufi) to a bootable DOS floppy disk, USB flash drive, or writable CD-ROM.

Note: 

Due to space limitations with floppy disks, you may need to create multiple floppy 

disks for each firmware image.

4

Power off your computer, disconnect the power cord, then open the cabinet following the 
manufacturer’s instructions.

5

Disconnect all cables from the controller, then attach a shorting jumper to the Mode 0 
flash connector. 

Note: 

To locate the Mode 0 flash connector on your Adaptec RAID controller, see the 

figures in 

6

Reconnect the power cord, power on your computer, then boot to the drive containing the 
AFU.exe file (see 

7

At the prompt, type 

<drive-letter>:\afu  update /c x

 

where 

drive-letter

 is the drive identifier (

a

 for a floppy drive, for instance) and 

x

 is the 

controller number.

Note: 

You will be prompted to insert other disks, as needed.

8

When the flash is complete, power off your computer, disconnect the power cord, then 
remove the jumper.

9

Close the computer cabinet, reconnect the power cord, then power on your computer. 

The controller should boot correctly.