Transition Networks Point System CVIDF2012-155 产品宣传页
产品代码
CVIDF2012-155
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2009 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
LINK PASS THRU
Ordering Info
CVIDF2011-150: Video Receiver (single)
BNC (75 ohm)
to Multimode (ST)
[1 km / 0.6 mi.] (normal mode)
[2 km / 1.2 mi.] (extended mode)
CVIDF2011-155: Video Receiver (dual)
(2) BNC (75 ohm)
to (2) Multimode (ST)
[1 km / 0.6 mi.] (normal mode)
[2 km / 1.2 mi.] (extended mode)
CVIDF2013-150: Video Receiver (single)
BNC (75 ohm)
to Multimode (SC)
[1 km / 0.6 mi.] (normal mode)
[2 km / 1.2 mi.] (extended mode)
CVIDF2013-155: Video Receiver (dual)
(2) BNC (75 ohm)
to (2) Multimode (SC)
[1 km / 0.6 mi.] (normal mode)
[2 km / 1.2 mi.] (extended mode)
CVIDF2012-150: Video Receiver (single)
BNC (75 ohm)
to Single Mode (ST)
[10 km / 6.2 mi.] (normal mode)
[20 km / 12.4 mi.] (extended mode)
CVIDF2012-155: Video Receiver (dual)
(2) BNC (75 ohm)
to (2) Single Mode (ST)
[10 km / 6.2 mi.] (normal mode)
[20 km / 12.4 mi.] (extended mode)
Connect Uni-Directional Analog Video Devices Over Fiber
CVIDF20xx-15x
point system™ slide-in-module network interface device
Transition Networks Point System™ Chassis Video Media Receiver, when paired
with our camera-mounted transmitter J/VD-TX-01, enables the transport of
analog CCTV video over fiber infrastructure for extended reach video surveil-
lance or security installations. And with Transition’s unique
with our camera-mounted transmitter J/VD-TX-01, enables the transport of
analog CCTV video over fiber infrastructure for extended reach video surveil-
lance or security installations. And with Transition’s unique
Extended Fiber
Receive Mode, the RX sensitivity can be adjusted to accommodate even
greater fiber link distances.
greater fiber link distances.
The chassis card is available in either a single video channel or the dual video
channel configuration, allowing for density flexibility that can be tailored to your
application. All video conversion is performed in real time and the
channel configuration, allowing for density flexibility that can be tailored to your
application. All video conversion is performed in real time and the
Automatic
Gain Control feature automatically adjusts the video contrast and brightness
to maintain the quality and integrity of the original video stream.
to maintain the quality and integrity of the original video stream.
Analog CCTV Video: NTSC, PAL, SECAM
Copper to Fiber
Analog CCTV Video Copper to Fiber Media Converter
Features
AM Modulation
NTSC, PAL, SECAM
compatibility
Compatible with all video
CCTV equipment
Real Time Full Color Video
Automatic Gain Control
Automatic Gain Control
Video Specification:
• Input Video: .5 to 2-volt
pk-pk (75 ohms)
• Bandwidth: 5 Hz – 10 MHz
• Differential Gain: < 5 %
• Differential Phase: < 5°
• Tilt: < 1%
• Signal/Noise Ratio: 60dB
• Differential Gain: < 5 %
• Differential Phase: < 5°
• Tilt: < 1%
• Signal/Noise Ratio: 60dB
Extended Fiber Receive Mode
Single or Dual Video Channel
configurations
Specifications
Video Formats
NTSC, PAL, SECAM
Optical Specs
Multimode: 850nm
6.0 dB Link Budget or
11.0 dB Link Budget
6.0 dB Link Budget or
11.0 dB Link Budget
Single Mode: 1310nm
10.0 dB Link Budget or
15.0 dB Link Budget
10.0 dB Link Budget or
15.0 dB Link Budget
Status LEDs
PWR (Power): ON = power connected
RX1: ON=Fiber Video feed in Channel 1
RX2: ON = Fiber Video feed in Channel 2 (dual only)
RX1: ON=Fiber Video feed in Channel 1
RX2: ON = Fiber Video feed in Channel 2 (dual only)
Jumpers
JP1: Normal/Extended Mode (Circuit 1)
JP5: Normal/Extended Mode (Circuit 2)
JP5: Normal/Extended Mode (Circuit 2)
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
2 watts (single card)
3 watts (dual card)
3 watts (dual card)
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A, EN55022 Class A, EN55024, CE Mark
Warranty
Lifetime