IMC Networks iMcV-FiberLinX-II, TX/FX-SM1310/LONG-SC 856-14018 用户手册
产品代码
856-14018
www.imcnetworks.com
800-624-1070
www.mediaconverter.com
VLAN Tagging and Extra-Tagging
Support for IEEE 802.1Q Extra Tagging, also known as Q-in-Q, allows the FiberLinX-II to more effectively route network
VLAN traffic. Extra tagging simplifies management and configuration efforts for service providers who have customers
using a range of VLAN IDs for different applications. Routing guidelines and other traffic rules can be programmed based
on the extra tag, rather than being programmed for all of the potentially hundreds of individual VLAN IDs. Also, since
a service provider’s customers control their own internal VLAN settings, the extra tag is needed to make sure there is no
overlap of VLAN IDs among customers, and to prevent traffic from different customers from becoming mixed. The extra
tag is removed once the traffic is routed to its correct destination, a process that is transparent to customers.
VLAN traffic. Extra tagging simplifies management and configuration efforts for service providers who have customers
using a range of VLAN IDs for different applications. Routing guidelines and other traffic rules can be programmed based
on the extra tag, rather than being programmed for all of the potentially hundreds of individual VLAN IDs. Also, since
a service provider’s customers control their own internal VLAN settings, the extra tag is needed to make sure there is no
overlap of VLAN IDs among customers, and to prevent traffic from different customers from becoming mixed. The extra
tag is removed once the traffic is routed to its correct destination, a process that is transparent to customers.
• IEEE 802.1Q VLAN compatible.
• Valid VLAN IDs are 1 to 4,094.
• Port-based VLAN tagging.
• Transparency Mode passes all data and respects the
• Valid VLAN IDs are 1 to 4,094.
• Port-based VLAN tagging.
• Transparency Mode passes all data and respects the
VLAN tag or lack thereof, i.e. allows a mixture of
VLAN Tagged and Untagged traffic.
VLAN Tagged and Untagged traffic.
• Configure to support VLAN trunking; FiberLinX-II can
filter up to 32 VLAN IDs for data, plus an additional ID
for SNMP (Transparency Mode disabled).
for SNMP (Transparency Mode disabled).
• IEEE 802.1p provides a 2-tier queue for differential
prioritization of inbound and outbound traffic. For
example, VoIP applications can be assigned a higher
priority than data traffic.
example, VoIP applications can be assigned a higher
priority than data traffic.
Service providers routinely use IEEE 802.1Q Virtual Local Area Network (VLAN) tagging to secure, separate and differentiate
customer traffic. FiberLinX-II enables service providers to support multiple VLAN-based applications.
customer traffic. FiberLinX-II enables service providers to support multiple VLAN-based applications.
VLAN Functionality on FiberLinX-II
iMcV-FiberLinX-II
Application Example
-
Media Conversion with Isolated Management
The diagram below illustrates a FiberLinX-II deployment with an IE-MiniFiberLinX-II acting as the CPE at the customer
demarcation point. The devices are configured so that management data is isolated from customer data, and does not
pass through to the customer LAN, while common media conversion functionality is performed without interruption.
demarcation point. The devices are configured so that management data is isolated from customer data, and does not
pass through to the customer LAN, while common media conversion functionality is performed without interruption.