Ideal Networks NaviTEK II BASISCable length meter, R153000 用户手册
产品代码
R153000
151810 Iss 1
NaviTEK II
Page 22
User Guide
When the TESTS icon from the Ethernet mode home screen is selected, Fig 30, the available IP tests will
be displayed on the Tests screen as shown in Fig 31.
be displayed on the Tests screen as shown in Fig 31.
Fig 30
Fig 31
Blink
A Hub Blink test forces the connected port of a network device to blink. NaviTEK II also changes the
speed and therefore LED color (on supporting devices) making it easier to identify the correct port. Select
the BLINK icon from the Tests screen, the test is started and stopped with the soft key F1 which displays
as RUN or STOP accordingly.
speed and therefore LED color (on supporting devices) making it easier to identify the correct port. Select
the BLINK icon from the Tests screen, the test is started and stopped with the soft key F1 which displays
as RUN or STOP accordingly.
Loop
Loop is to be used with an Ethernet traffic generator.
See Tests on page 14 for details of loopback types.
See Tests on page 14 for details of loopback types.
Netscan
Fig 32
Netscan will report the number of IPv4 hosts
and IPv6 hosts detected within the scan
range. Press the soft key SETUP (F3) to
adjust the scan settings if required.
and IPv6 hosts detected within the scan
range. Press the soft key SETUP (F3) to
adjust the scan settings if required.
.