Fenix LD12 FENIX LD12 数据表

Ⴟ  54-gram weight (excluding battery and holster) 

Ⴟ  Digitally regulated output - maintains constant brightness 

Ⴟ  Reverse polarity protection, to protect from improper battery installation 

Ⴟ  Anti-roll, slip-resistant body design 

Ⴟ  Tactical tail cap switch with momentary-on function 

Ⴟ  Side mode switch in the front 

Ⴟ  Made of durable aircraft-grade aluminum 

Ⴟ  Premium Type III hard-anodized anti-abrasive finish 

Ⴟ  Toughened ultra-clear glass lens with anti-reflective coating 

Notice: The above-mentioned parameters (tested by 2500mAh Ni-MH battery in Lab) are 

approximate and may vary between flashlights, batteries and environments. 

The tail cap switch is the power switch and the side button is the mode switch. 

Press the tail cap switch lightly to activate the flashlight momentarily (without any press, it will be 

off); Press the tail cap switch completely to turn on the flashlight and lock it. Another press can 

turn it off. 

When the flashlight is on, a single press on the side mode switch can select the brightness levels in 

the order of Turbo

ĺLowĺMidĺHighĺCycle; 

Press and hold the side mode switch for about one second to enter into the Strobe. It will flash in 

the frequency of 6Hz/15Hz and transfer the frequency in every 2 seconds. 

Press and hold the side mode switch for about 3 seconds to enter into the SOS. 

Under the condition of Strobe or SOS, a single press on the side mode switch can return to the 

general mode. 

The flashlight can memorize the brightness levels in the general mode except the mode. When 

turn it on, it will begin to work in the general mode. 



Ni-MH Battery 

AA 

1.2V 

Recommended

෭෭෭෭

Alkaline Battery 

AA 

1.5V 

Usable 

෭෭෭෭