Speaka Professional HDMI LWL-HYBRID-KABEL 30,5 M 491106 数据表

                                  - 30 m

These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau (www.conrad.com). 
All  rights  including  translation  reserved.  Reproduction  by  any  method,  e.g.  photocopy,  microfilming,  or  the  capture  in  electronic  data 
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. 
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.

This HDMI fibre optic cable connects a video playing device with a remotely installed monitor 
or television. Due to the length of the cable an additional power supply is necessary. The power 
supply will be provided for instance by means of an existing USB socket at a monitor and the 
USB plug attached to the product. 

For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you 
use the product for purposes other than those described above, the product may be damaged. 
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. 
Read the instructions carefully and keep them. Make this product available to third parties only 
together with its operating instructions.

This product complies with the statutory national and European requirements. All company 
names and product names are trademarks of their respective owners. All rights reserved.

•  HDMI fibre optic cable
•  2 x pull ring
•  Operating instructions

•  The device is not a toy. Keep it out of the reach of children and pets.
•  Do not leave packaging material lying around carelessly. These may become dangerous 

playing material for children.

•  Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, 

moisture, flammable gases, vapours and solvents.

•  Do not place the product under any mechanical stress.
•  If it is no longer possible to operate the product safely, take it out of operation and protect it 

from any accidental use. Safe operation can no longer be guaranteed if the product:

 - is visibly damaged, 
 - is no longer working properly, 
 - has been stored for extended periods in poor ambient conditions or 
 - has been subjected to any serious transport-related stresses.

•  Please  handle  the  product  carefully.  Jolts,  impacts  or  a  fall  even  from  a  low  height  can 

damage the product.

•  Also observe the safety and operating instructions of any other devices which are connected 

to the product.

•  Consult an expert when in doubt about operation, safety or connection of the device.
•  Maintenance, modifications and repairs are to be performed exclusively by an expert or at 

a qualified shop.

•  If you have questions which remain unanswered by these operating instructions, contact our 

technical support service or other technical personnel.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Remove the protection foil from the cable reel and observe Fig. 1 to 5, in order to prepare the 
cable: 
•  Fig. 1: HDMI cable and pull ring. 2 pull rings are included in the delivery. The HDMI plugs 

are marked with TX (transmitter) and RX (receiver). Connect the TX plug with the player (e.g. 
Blu-ray player or game consule). Connect the RX plug with the monitor. 

•  Fig. 2: Place the pull ring on the cable with a distance of approx. 3 inch from the HDMI plug. 

Wind the cable (including the USB plug, if you pull from the RX plug) twice around the pull 
ring. 

•  Fig. 3: Fix the cable with insulating tape directly below the pull ring. 
•  Fig. 4: Wind the insulating tape from below the pull ring up to the end point of the cable and 

over the HDMI plug (and USB plug) in order to secure cable and plug. 

•  Fig. 5: You now have a secured cable bundle, which is ready to be pulled through the cable 

channel. 

Kindly observe that during the pulling of the cable it will not bend at an angle of 
more than 90 degrees. Otherwise the cable could be damaged. 
Avoid to apply a tensile strength higher than 290 N (Newton). Do not pull directly at 
the plug. Only pull the cable at the supplied and properly fixed pull ring. 

•  The  product  is  maintenance  free.  Disconnect  the  product  from  the  power  supply  and 

connected devices before cleaning. 

•  If necessary, clean the plugs with a clean and dry cloth. 

Electronic devices are recyclable waste and must not be disposed of in the household 
waste. At the end of its service life, dispose of the product according to the relevant 
statutory regulations. 

You thus fulfil your statutory obligations and contribute to the protection of the environment.

Bandwidth ......................................... max. 16 GB/s
Supported video formats .................. 1080p/i, 720p, 3D
Supported resolution ........................ up to 4K
Operating voltage ............................. 5 V/DC (via USB)
Power consumption .......................... 0.6 W (transmitter)
.......................................................... 0.5 W (receiver)
Clock ................................................. 27 MHz, 74.25 MHz, 148 MHz, 165 MHz, 220 MHz, 340 MHz
Time jitter .......................................... < 0.3 T/Bit
Crosstalk ........................................... < -20 dB
Compatibility ..................................... CEC/DDC/HDCP
Bending radius .................................. >3 cm
Tensile strength ................................ max. 290 N
Cable length ..................................... 30 m (Item no. 491106)
 

50 m (Item no. 491107)

 

100 m (Item no. 491108)

 

 

 

300 m (Item no. 491111)

Operating conditions ......................... 0 to +50 ºC, 0 – 90 % RH (non condensing)
Storage conditions ............................ -20 to +60 ºC, 0 – 90 % RH (non condensing)