IMC Networks iMcV-FiberLinX-II, TX/FX-MM1300-SC 856-14012 用户手册
产品代码
856-14012
www.imcnetworks.com
800-624-1070
www.mediaconverter.com
Full-Featured FiberLinX-II
EtherType Control
The FiberLinX-II allows for the ability of setting a different
EtherType on the extra tag in order to uniquely identify
extra-tagged traffic. The available EtherType codes are
8100, 9100, and 9200.
The FiberLinX-II allows for the ability of setting a different
EtherType on the extra tag in order to uniquely identify
extra-tagged traffic. The available EtherType codes are
8100, 9100, and 9200.
Dedicated Management Port
The EXT MGMT port on the FiberLinX-II provides the ability
to physically isolate the management domain from the
data domain, allowing users to manage edge devices and
beyond while protecting the management domain from
unwanted access.
The EXT MGMT port on the FiberLinX-II provides the ability
to physically isolate the management domain from the
data domain, allowing users to manage edge devices and
beyond while protecting the management domain from
unwanted access.
Troubleshooting Features
FiberAlert and LinkLoss along with LEDs assist in diagnosing
potential problems on fiber optic networks. Additionally,
RMON and IFSTAT statistics are available.
FiberAlert and LinkLoss along with LEDs assist in diagnosing
potential problems on fiber optic networks. Additionally,
RMON and IFSTAT statistics are available.
Last Gasp Trap
The Last Gasp Trap is an SNMP feature that allows the
module to notify the network when the module has lost
power.
The Last Gasp Trap is an SNMP feature that allows the
module to notify the network when the module has lost
power.
Loopback Testing
Loops back all frames arriving on the fiber port (except
for the device’s management traffic). When in Loopback
mode, FiberLinX-II drops the link on the twisted pair port.
Loops back all frames arriving on the fiber port (except
for the device’s management traffic). When in Loopback
mode, FiberLinX-II drops the link on the twisted pair port.
Supports the Unified Management Agent (UMA)
The Unified Management Agent (UMA) allows users to
manage all FiberLinX-II modules installed in an IMC
Networks iMediaChassis (and any connected remote
modules) with a single IP address from a central location,
conserving precious IP addresses. Additionally, UMA allows
users to centrally manage and administer firmware upgrades
over multiple devices, saving time.
The Unified Management Agent (UMA) allows users to
manage all FiberLinX-II modules installed in an IMC
Networks iMediaChassis (and any connected remote
modules) with a single IP address from a central location,
conserving precious IP addresses. Additionally, UMA allows
users to centrally manage and administer firmware upgrades
over multiple devices, saving time.
From a central location, network operators are able to receive real-time device and traffic statistics on the remote CPE or
other devices connected to the remote management port, allocate bandwidth, turn services on or off, initiate loopback
testing, change customer VLAN settings and adjust QoS policies assigned to different traffic types.
other devices connected to the remote management port, allocate bandwidth, turn services on or off, initiate loopback
testing, change customer VLAN settings and adjust QoS policies assigned to different traffic types.
Offering unparalleled flexibility, FiberLinX-II supports multiple fiber types including multi-mode and single-mode as well as
single-strand fiber which can effectively double the capacity of installed fiber. The FiberLinX-II features:
single-strand fiber which can effectively double the capacity of installed fiber. The FiberLinX-II features:
One 100 Mbps fi ber data port
One 10/100 twisted pair (RJ45) data port
One additional 10/100 twisted pair port (EXT MGMT) for management (can also function as a serial port)
One 10/100 twisted pair (RJ45) data port
One additional 10/100 twisted pair port (EXT MGMT) for management (can also function as a serial port)
The DATA port on the FiberLinX-II provides auto-negotiation, automatic crossover detection, full or half duplex and selective
advertising. Ports also feature Flow Control in Full Duplex Mode (FDX) and Back Pressure Flow Control.
advertising. Ports also feature Flow Control in Full Duplex Mode (FDX) and Back Pressure Flow Control.
•
•
•
•
•
Flexibility
iMcV-FiberLinX-II
SNMP Management Made Easy
FiberLinX-II features an SNMP management agent for monitoring the status and activity on copper and fiber ports at the
remote end. Perform initial setup of the unit and modifications in the field via: iView² SNMP application, Telnet/TFTP, or
local serial connection.
remote end. Perform initial setup of the unit and modifications in the field via: iView² SNMP application, Telnet/TFTP, or
local serial connection.
Enable features and change configuration settings from central office.
Remote upgrades via Telnet/TFTP, serial port or iView².
Monitor both units and the fiber in between.
Receive real-time monitoring and statistics.
Change bandwidth “on-the-fly” up to 100 Mbps in 32 kb increments.
Create a secure management domain to isolate management domain
broadcasts from TX Data ports on both units.
User-definable unit/port descriptions and information.
Remote upgrades via Telnet/TFTP, serial port or iView².
Monitor both units and the fiber in between.
Receive real-time monitoring and statistics.
Change bandwidth “on-the-fly” up to 100 Mbps in 32 kb increments.
Create a secure management domain to isolate management domain
broadcasts from TX Data ports on both units.
User-definable unit/port descriptions and information.
•
•
•
•
•
•
•
•
•
•
•
•