3M Low power connector ATT.CALC.CROSS_SECTION_FLEXIBLE: 0.3-0.56 mm² ATT.CALC.CROSS_SECTION_RIGID: 0.3-0.56 mm² Number of p 37104-2206-000 FL 数据表
产品代码
37104-2206-000 FL
Product Information
Mini Clamp Wiremount Plug Connector
3M Deutschland GmbH
Tel.: 02131 / 14 2040
4 - 6
February 2004
Electronic Solutions
Fax.: 02131 / 14 2065
Carl-Schurz-Straße 1
E-Mail: 3minterconnects.de
41453 Neuss
Electrical Specifications
Contact Resistance
After evaluation tests
readings are the change in
resistance from the initial
reading in milli-ohms.
±25m MAX.
readings are the change in
resistance from the initial
reading in milli-ohms.
±25m MAX.
FL type
- 3M SEQUENCE 1
- 3M SEQUENCE 1
Mating(50
cycles)
Moisture
Salt splay
- 3M SEQUENCE 2
Thermal
shock
Humidity
Vibration
- 3M SEQUENCE 3
Temperature life
-H2S GAS SEQUENCE
Mating (50
cycles)
H2S gas
-Durability
Mating (500 cycles)
Refer TABLE-2
Environmental Tests
ITEM
TEST CONDITION
RELATED STD.
Reference
Moisture
-10 to 65°C , 95%RH / 10 cycles
MIL-202F-106 E
Salt spray
Salt solution : 5% (NaCl) Temperature : 35
Duration: 48 hours
Duration: 48 hours
MIL-202F-101 D
Thermal shock
- 55°C => 25°C => 85°C => 25°C / 5 cycles
MIL-202F-107 G
Humidity
(Steady state
Temperature range : 40
Relative humidity : 95%RH
Duration: 96 hours
MIL-202F-103 B
Temperature Life
Temperature : 85°C Current : 1A
Duration: 1000 hours
Duration: 1000 hours
MIL-202F-108 A
H
2
S gas
H
2
S gas : 3
± PPM Temperature : 40
Humidity: 70~80%RH Duration: 96 hours
JEIDA-34-1984
Vibration
Sweep freq.: 10~55Hz, amplitude: 1.52mm (or 10G)
Sweep cycle: 1 min, sweep time: 2 hours
Sweep directions: X, Y, Z
Sweep cycle: 1 min, sweep time: 2 hours
Sweep directions: X, Y, Z
MIL-202F-213 B
STORAGE CONCITION
-22 degrees to 55 degrees,
Relative humidity 5-95%,
Without dewdrop and a drop of water.
Relative humidity 5-95%,
Without dewdrop and a drop of water.
PACKAGE & IDENTIFICATION
It puts it in plastic tray, and this article is shipped with form packed with carton more. Carton box is identified of
1) part number, 2) quantity, and 3) maker name and 4) lot number.
1) part number, 2) quantity, and 3) maker name and 4) lot number.