Axis Camera Station w/ 10-base license 0202-004 用户手册

An Internet Explorer Web browser can be used on client workstations to view live video, recordings and I/O status. 

This feature is not available for AXIS Camera Station One.

To enable 

Live View, a set of IP addresses and port numbers must be opened in your firewall; there must be an open port 

for each camera and one port for AXIS Camera Station. See 

Network Configuration, on page 28. Simply viewing recorded 

events/images does not require the firewall configurations.

If you want to allow clients access to AXIS Camera Station Web, 
proceed with these steps.

1. Under Options > General Settings > General, check 

Enable Web access under Camera Station Web 

access.

2. In the Web server IP address field, make sure the 

correct IP address that Clients will use to connect to 

the server is entered. Make a note of the IP address.
• For internal Web access from a LAN, enter the 

LAN IP address of the dedicated PC.

• For external Web access from a WAN, enter the 

WAN IP address.

3. The installation of the Web interface will start. 

When the Web interface is installed on the server, 

Web sharing is enabled

• In Windows XP Professional, a maximum of five 

users can access to the Web interface simultaneously. This limitation is not present in other operating 

systems.

• To be able to log into AXIS Camera Station from a Web browser, the user must be created in the 

Windows user database. See How to set up User Access Settings, on page 19.

1. Open a Web browser on the client computer. 
2. In the Address field, write http://server IP address/videoweb