BTR NETCOM BTR Keystone module CAT 6A K 180° 130B21-E 数据表
产品代码
130B21-E
Datenblatt / Data sheet
C6
A
modul K 180°
130B21-E
Produktbeschreibung
Product specification
Bestell-Nr. / Part no.
Abbildungen / Illustration
Maßzeichnung / Dimensions
Einbauausschnitt / Cut out
Seite/Page 1/2
• modulare Anschlusseinheit RJ45
• GHMT Cat.6
• GHMT Cat.6
A
re-embedded PVP zertifiziert
• Cat.6
A
Komponentenprüfung nach ISO/IEC 11801
Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2
(2009-08) und IEC 60603-7-51 Ed.1 (12/2008),
GHMT zertifiziert
• Einhaltung der Klasse E
A
bis 500 MHz nach ISO/IEC 11801
Ed.2.2:2011-06, DIN EN 50173-1:2011-09
• getestet: Komponente bis 600 MHz, Link bis 800 MHz
• für 10 GBit Ethernet (IEEE 802.3an)
• geeignet für Power over Ethernet
• für 10 GBit Ethernet (IEEE 802.3an)
• geeignet für Power over Ethernet
(PoE, PoE plus und UPoE)
• montagefreundlicher Anschluss von Datenleitungen AWG
26/1 - 22/1 (eindrähtig) und AWG 26/7 bis 22/7 (mehr-
drähtig) an IDC-Schneidklemmen
• intelligentes Kabelmanagement im Ladestück, auch für
stark verdrillte Leitungen geeignet
• Kennzeichnung der Adernbelegung T568A und T568B
direkt auf dem Ladestück
• robustes, einteiliges und wieder verwendbares
Modulgehäuse aus Zinkdruckguss, veredelt
• Montage ohne Spezialwerkzeug, Zugentlastung per
Rastclip direkt am Ladestück
• Einbauform: Keystone, Kabelzuführung 180°
• modular termination unit RJ45
• certified to GHMT Cat.6
• certified to GHMT Cat.6
A
re-embedded PVP
• component testing for Cat.6
A
to ISO/IEC 11801
Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2
(2009-08) and IEC 60603-7-51 Ed.1 (12/2008),
certified to GHMT
• compliance with class E
A
up to 500 MHz to ISO/IEC 11801
Ed.2.2:2011-06, DIN EN 50173-1:2011-09
• tested: component up to 600 MHz, link up to 800 MHz
• for 10 GBit Ethernet (IEEE 802.3an)
• suitable for Power over Ethernet (PoE, PoE plus and UPoE)
• easy to install connection of data lines AWG 26/1 to 22/1
• for 10 GBit Ethernet (IEEE 802.3an)
• suitable for Power over Ethernet (PoE, PoE plus and UPoE)
• easy to install connection of data lines AWG 26/1 to 22/1
(solid wire) and AWG 26/7 to 22/7 (stranded wire) to insu-
lation displacement connectors (IDC)
• intelligent cable management in stuffer cap - also suitable
for heavily twisted cables
• conductor assignment to T568A and T568B is directly
printed on the stuffer cap
• solid, one-piece and reusable module housing refined with
zinc die-casting
• mounting without special tools; strain relief directly
snapped on to stuffer cap
• mounting version: Keystone, 180° cable feed
2014-04-11
© 2014 METZ
CONNECT
- Technische Änderungen vorbehalten! Subject to modifications!
METZ CONNECT GmbH
Im Tal 2 | 78176 Blumberg | Deutschland
Tel. +49 7702 533-0 | Fax +49 7702 533-433
Weiterführende Dokumentation siehe www.metz-connect.com
Im Tal 2 | 78176 Blumberg | Deutschland
Tel. +49 7702 533-0 | Fax +49 7702 533-433
Weiterführende Dokumentation siehe www.metz-connect.com