Intellinet 524711 Wireless Outdoor Access Poinr 300Mbps 524711 用户手册

 ENGLISH

Thank you for purchasing the Intellinet Network Solutions

™

 Wireless 300N 

Outdoor PoE Access Point, Model 524711. 
This guide presents the basic steps to set up and operate this device. For 

detailed instructions and specifications, refer to the user manual on the CD 

enclosed with this product or at intellinet-network.com. 

 

Installation 

1.  Attach the antennas to the access point.  

  NOTE: Antenna 1 is the primary antenna, 

  used while transmitting/receiving in  

  11b/g/n (single antenna) mode. 

2.  Using the included Ethernet cable,  

  connect the RJ45 port of the access point to the Power/Data Out port on 

  the DC injector. 

3.  Connect the LAN port 

  on the DC injector to 

  your network switch 

  or hub. 

4.  Connect the power  

  adapter to the DC 

 injector. 

5.  Using the included 

  power cord, connect 

  the power adapter 

  to an available AC 

 outlet. 

NOTE: Only use  

  the power adapter 

  included with this 

  access point — not 

  one from any other 

  device. (See Step 6 

  for an alternative 

 configuration.)

Wireless 300N Outdoor PoE Access Point • Quick Install Guide 

English