AVM 3370 20002563 用户手册
产品代码
20002563
FRITZ!Box 3370
32
Changing the Annex Setting of the FRITZ!Box
Configuring the Internet Connection Without the Wizard
You can also set up the Internet connection without the Wiz-
ard.
ard.
1.
).
2.
Select the “Internet / Account Information” menu and
enter your account information.
enter your account information.
Also take advantage of the Help available in the FRITZ!Box
user interface.
user interface.
7.2
Changing the Annex Setting of the FRITZ!Box
The FRITZ!Box cannot establish a connection to the DSL
network. This is signaled by the continued flashing of the
“Power” LED.
network. This is signaled by the continued flashing of the
“Power” LED.
The kind of DSL (Annex A, B, J or M) set in the FRITZ!Box is not
the same as the annex used on your DSL line.
the same as the annex used on your DSL line.
1.
Contact your Internet service provider to find out which
annex is used on your DSL line.
annex is used on your DSL line.
2.
Connect a computer with the FRITZ!Box either wirelessly
via WLAN or using a network cable.
via WLAN or using a network cable.
3.
Open the FRITZ!Box user interface.
4.
Open the “Internet / DSL Information” and select the
“Line Settings” page.
“Line Settings” page.
5.
In the “Annex Settings” area, make sure that the annex
working on your DSL line is set. Save your settings by
clicking “Apply”.
working on your DSL line is set. Save your settings by
clicking “Apply”.
After the annex setting has been changed, the FRITZ!Box re-
starts automatically. The connection to the DSL network has
been established as soon as the “Power” LED stops flashing
and remains lit up.
starts automatically. The connection to the DSL network has
been established as soon as the “Power” LED stops flashing
and remains lit up.
Cause
Help