AVM 3370 20002563 用户手册
产品代码
20002563
FRITZ!Box 3370
62
WLAN—Getting Technical
Setting the Right Standard in the FRITZ!Box
The throughput rate that can be achieved in your WLAN radio
network depends on the WLAN standards used by the inte-
grated WLAN devices. These WLAN standards must also be
set in the FRITZ!Box. Proceed as follows to check which WLAN
standards are set and change them if needed:
network depends on the WLAN standards used by the inte-
grated WLAN devices. These WLAN standards must also be
set in the FRITZ!Box. Proceed as follows to check which WLAN
standards are set and change them if needed:
1.
Open the FRITZ!Box user interface.
2.
Enable the advanced view.
3.
Open the “WLAN / Radio Channel” menu and select “Ad-
just radio channel settings” to make the desired chang-
es.
just radio channel settings” to make the desired chang-
es.
•
In order to communicate with each other, the FRITZ!Box
and all WLAN devices must work in the same frequency
band.
and all WLAN devices must work in the same frequency
band.
•
The standard you configure in the FRITZ!Box must be
compatible with the standards of all WLAN devices used
in the WLAN.
compatible with the standards of all WLAN devices used
in the WLAN.
Make a note of which standards the WLAN devices in your
network are compatible with and then adjust the FRITZ!Box
settings according to the following information:
network are compatible with and then adjust the FRITZ!Box
settings according to the following information:
•
Your radio network integrates only WLAN devices that
are compatible with one or both of the following stan-
dards:
are compatible with one or both of the following stan-
dards:
802.11n
802.11g
Set the following mode in the FRITZ!Box:
Mode: 802.11n+g
The 2.4-GHz frequency band will be used.
Note the following for the configuration of this setting: