Rigol DS2302A-S 2-channel oscilloscope, Digital Storage oscilloscope, DS2302A-S 用户手册
产品代码
DS2302A-S
RIGOL
DS2000A User’s Guide
12-15
ON: the waveform editing window only displays the current point.
OFF: the waveform editing window displays all the initial points.
OFF: the waveform editing window displays all the initial points.
4. Current Point
Press CurPoint and use
or the navigation knob to select the point to be
edited. The range is from 1 to the initial points.
5. Voltage
Press Voltage to set the voltage of the current point. The range is from -2.5 V to
+2.5 V.
+2.5 V.
6. Time
Press Time to set the duration of the current point. This setting is limited by the
times of the previous point and following point. The time of point 1 is fixed at 0 s.
times of the previous point and following point. The time of point 1 is fixed at 0 s.
7. Insert
Press Insert to insert a new waveform point between the current point and the
next point.
next point.
8. Delete
Press Delete to delete the current point from the waveform and connect the
remaining points using the current interpolation mode. Note that point 1 can not
be deleted.
remaining points using the current interpolation mode. Note that point 1 can not
be deleted.
9. Done
Press Done to finish editing the current waveform.
10. Save
Press Save to enter the file store interface. Please refer to the introduction in
internal memory (you can overwrite the original file or save the current
waveform again).You can select the arbitrary waveforms in the internal or
external memory for output. For details, refer to the introduction in
waveform again).You can select the arbitrary waveforms in the internal or
external memory for output. For details, refer to the introduction in