Rigol DS1104B 4-channel oscilloscope, Digital Storage oscilloscope, DS1104B 用户手册
![Rigol](https://files.manualsbrain.com/attachments/4ef153c5b3a9e56ac40ea738ae281ea9dc808cdc/common/fit/150/50/a84f25c70c016e6b8d8e8d0fbe042c3bbe7b8a8feeee0ecbbc25ec79cb57/brand_logo.gif)
产品代码
DS1104B
RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for DS1000B Series
1-7
Figure 1-5
Attach the probe
②
Set the probe attenuation of the oscilloscope to 10X. To do this, push
CH1→Probe→10X.
Figure 1-6 Figure 1-7
Set the probe The CH1 menu
③
Push the AUTO button. Within a few seconds, a square wave will be displayed on
the screen.
④
Push the OFF button or push the CH1 button again to turn off Channel 1.
Push the CH2, CH3, CH4 buttons to turn on channel 2, channel3, channel4, repeat
steps 2 and 3.
Push the CH2, CH3, CH4 buttons to turn on channel 2, channel3, channel4, repeat
steps 2 and 3.
NOTE: The signal output from Probe compensator should only be used for probe
compensation, not for calibration.
compensation, not for calibration.
Probe scale
Probe compensator