Rigol DS1104B 4-channel oscilloscope, Digital Storage oscilloscope, DS1104B 用户手册
产品代码
DS1104B
RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for DS1000B series
2-100
Manual Mode
Figure 2-130 Table 2-87 The Cursors menu
Menu Settings
Comments
Mode
Manual
Adjust the cursor to measure X/Y
parameters manually.
parameters manually.
Type
X
Y
Shown as vertical line to measure the
horizontal parameters.
Shown as horizontal line to measure
the vertical parameters.
horizontal parameters.
Shown as horizontal line to measure
the vertical parameters.
Source
CH1
CH2
CH3
CH4
CH2
CH3
CH4
MATH
Select the measurement signal source.
In this mode, the oscilloscope measures the Y or X coordinate values of the cursors,
and the increments between the two cursors.
and the increments between the two cursors.
To do manual Cursor Measurements, please do as the following steps:
1. Select the Manual mode for cursor measurement by pressing soft button as:
Cursor→Mode→Manual.
2. Select channel Source for measurements by pressing soft button as:
Cursor→Source→CH1, CH2, CH3, CH4, MATH.
NOTE: While measuring the channel with MATH, the results are valued with “d”
(division) as units.
(division) as units.
3. Select the cursors type by pressing soft button as Cursor→Type→ X or Y.
4. Move the cursors to adjust the increment between the cursors:(Details in the
following Table)