Fluke 1653B05-TPOLEKIT/FVDE-tester 4426033 用户手册

39 

4. Press 

 to recall the data. The tester display will revert to the Test mode 

used for the recalled test data, however, the  icon still appears, 
indicating the tester is still in Memory mode. 

5. Press 

 to toggle between the data id screen and the recalled data screen 

to check the recalled data id or to select more data to recall. 

6. Press 

 to exit Memory mode at any time. 

1. Press 

 to enter Memory mode.  

2. Press 

. The primary display will show Clr? 

3. Press 

 again to clear all memory locations. The Tester returns to the 

measurement mode. 

1. Press 

 to enter Memory mode.  

2. Press 

. The primary display will show Clr? 

If either the data set (a) or the subset number (b) changes since the 
last stored result, the display shows the data set (a) and subset 
number (b) of the last stored result. Press  again to show “Clr?” and 
the data ID (c). 

3. Press 

 to enable clear all memory. The display shows Clr All? 

4. Press 

 to confirm clear all memory. All memory is cleared and the Tester 

returns to the measurement mode. 

1. Press 

 to enter Memory mode. The display shows the last date set (a) 

and data subset (b) selections. 

2. Press 

. The primary display will show Clr? and the data ID (c). 

If either the data set (a) or the subset number (b) changes since the 
last stored result, the display shows the data set (a) and subset 
number (b) of the last stored result. Press  again to show “Clr?” and 
the data ID (c). 

3. Press 

 to delete the last valid stored result. The display shows the next 

last valid id number (c) for a short time and then the Tester returns to the 
measurement mode.