Perfectpro HANDSFREE HF1 数据表
产品代码
HF1
8. Depending on the capacity of the batteries, charging from “empty” to “full” can take
several hours, even up to 10 hours or more.
9. Do not charge batteries when the radio is hot or exposed to heat or heat sources.
10. It is advised to clean the metal contacts of the batteries and of the charger inside
the radio e.g. with a contact-spray from time to time.
11. Do not use a mix of old and new rechargeable batteries.
12. Do not use a mix of rechargeable and non-rechargeable batteries.
13. Do not use a mix of full and empty rechargeable batteries.
14. Do not use batteries that have a different mAh capacity.
15. Do not use damaged, deformed or leaking batteries.
16. Battery level indication is an approximate indication only and can vary with battery
type used.
17. Batteries can become hot during charging.
18. In cold conditions the capacity of batteries will be much lower than when used at
normal room temperature
19. Batteries (even when supplied with the radio), as being consumables, do not fall
under the warranty conditions of the radio.
20. It is advised to use Perfectpro rechargeable batteries as the radio and its charger
were developed for use with these batteries.
GENERAL FUNCTIONS
1.
Switching on and off
Press the
On/Off button to turn the radio on or in standby.
2.
Switching among DAB / FM / Bluetooth / AUX IN modes
Press the
Source button to switch between modes.
3.
Tuning the Radio
Tune the radio using the
Tuning knob on the right.
4.
Adjusting the Volume
Adjust the volume with the
Volume knob on the left.
5.
Adjusting the Tone
Press the
Volume knob on the left and rotate it to adjust the Bass and Treble.
6.
Selecting Stereo or Mono mode (in FM mode only)
Press the
Mono/Stereo button to switch between FM Mono or FM Stereo.
7.
Pairing the Bluetooth with your mobile phone
Select the device “PP Handsfree” in the Bluetooth setting screen of the mobile
phone.
8.
Playing music from your mobile phone in Bluetooth mode
Use the media players in the mobile phone.
9.
Playing music stored in a paired mobile phone from the Handsfree radio in
Bluetooth mode
Press the ,
and
buttons (preset buttons 3, 4 and 5).
10.
Answering an incoming phone call from the Handsfree radio
Press the Tuning knob (Phone icon) on the right to pick up and hang up the phone
call.
11.
Redialing the last out going phone call in Bluetooth mode
Press and hold the Tuning knob (Phone icon) on the right for more than 2 seconds.
12.
Charging a mobile phone from the Handsfree radio
Connect the mobile phone to the USB socket on the left side with an appropriate
cable (not included with the radio).
13.
Anti-Theft-Protection (ATP) System
Press the preset buttons (1-10) to enter the 4-digits numeric passcode.
USING THE RADIO FOR THE FIRST TIME
1. Place the radio on a flat surface.
2. Carefully extend the antenna located on the top of the radio. Adjust the antenna so
it is vertically extending above the radio.
3. Plug the AC power cord into the AC socket. The radio will start up and the display
will show “WELCOME TO DIGITAL RADIO” for a few seconds. Then the radio will
automatically perform an auto scan of the Band III DAB channels and the FM band.
The display will show “Scanning” in DAB and “Auto” in FM.
4. When the scan is completed, the 10 strongest FM stations will be stored as presets
and the available DAB stations will be in the list of stations. The radio will switch to
standby with the updated clock and date showing on the display.
5. If no signals are found, the clock will not be updated. It may be necessary to
relocate the radio to a position with better reception.
7
8
G B
GB