3com 4210 PWR 9-Port 3CR17341-91-ME 用户手册
产品代码
3CR17341-91-ME
34
C
HAPTER
2: L
OGGING
INTO
AN
E
THERNET
S
WITCH
# Set the timeout time of the AUX user interface to 6 minutes.
[4210-ui-aux0] idle-timeout 6
After the above configuration, you need to modify the configuration of the
terminal emulation utility running on the PC accordingly in the dialog box shown
in Figure 4 to log into the switch successfully.
terminal emulation utility running on the PC accordingly in the dialog box shown
in Figure 4 to log into the switch successfully.
Console Port Login
Configuration with
Authentication Mode
Being Scheme
Configuration Procedure
Table 16 Console port login configuration with the authentication mode being scheme
Operation
Command
Description
Enter system view
system-view
-
Configure the
authenticatio
n mode
authenticatio
n mode
Enter the default
ISP domain view
ISP domain view
domain domain-name
Optional
By default, the local AAA
scheme is applied.
scheme is applied.
If you specify to apply the
local AAA scheme, you need
to perform the configuration
concerning local user as well.
local AAA scheme, you need
to perform the configuration
concerning local user as well.
If you specify to apply an
existing scheme by providing
the radius-scheme-name
argument, you need to
perform the following
configuration as well:
existing scheme by providing
the radius-scheme-name
argument, you need to
perform the following
configuration as well:
■
Perform AAA&RADIUS
configuration on the
switch. (Refer to “AAA
Configuration” on
page 245 for more
information.)
configuration on the
switch. (Refer to “AAA
Configuration” on
page 245 for more
information.)
■
Configure the user name
and password accordingly
on the AAA server. (Refer
to the AAA server’s user
manual.)
and password accordingly
on the AAA server. (Refer
to the AAA server’s user
manual.)
Specify the AAA
scheme to be
applied to the
domain
scheme to be
applied to the
domain
scheme { local | none |
radius-scheme
radius-scheme-name [ local
] | hwtacacs-scheme
hwtacacs-scheme-name [
local ] }
radius-scheme
radius-scheme-name [ local
] | hwtacacs-scheme
hwtacacs-scheme-name [
local ] }
Quit to system
view
view
quit
Create a local user (Enter local
user view.)
user view.)
local-user user-name
Required
No local user exists by
default.
default.
Set the authentication password
for the local user
for the local user
password { simple |
cipher } password
cipher } password
Required
Specify the service type for AUX
users
users
service-type terminal [
level level ]
level level ]
Required
Quit to system view
quit
-
Enter AUX user interface view
user-interface aux 0
-
Configure to authenticate users
locally or remotely
locally or remotely
authentication-mode
scheme [ command-
authorization ]
scheme [ command-
authorization ]
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
determines whether to
authenticate users locally or
remotely.
By default, users logging in
through the Console port
(AUX user interface) are not
authenticated.
through the Console port
(AUX user interface) are not
authenticated.