3com 4210 PWR 9-Port 3CR17341-91-ME 用户手册

C

HAPTER

 45: R

EMOTE

-P

ING

 C

ONFIGURATION

For detailed output description, see the corresponding command manual.

Both the Remote-Ping client and the Remote-Ping server are Switch 4210s. 
Perform a Remote-Ping Udpprivate test on the specified ports between the two 
switches to test the RTT of UDP packets between this end (Remote-Ping client) and 
the specified destination end (Remote-Ping server).

Figure 187   Network diagram for the Udpprivate test

■

Configure Remote-Ping Server (Switch B):

# Enable the Remote-Ping server and configure the IP address and port to listen 
on.

<4210> system-view

 

[4210] Remote-Ping-server enable

 

[4210] Remote-Ping-server udpecho 10.2.2.2 8000 

■

Configure Remote-Ping Client (Switch A):

# Enable the Remote-Ping client.

<4210> system-view

 

[4210] Remote-Ping-agent enable 

# Create a Remote-Ping test group, setting the administrator name to 
"administrator" and test tag to "udpprivate".

[4210] Remote-Ping administrator udpprivate 

# Configure the test type as udpprivate.

[4210-Remote-Ping-administrator-udpprivate] test-type udpprivate 

# Configure the IP address of the Remote-Ping server as 10.2.2.2.

[4210-Remote-Ping-administrator-udpprivate] destination-ip 10.2.2.2 

# Configure the destination port on the Remote-Ping server.

[4210-Remote-Ping-administrator-udpprivate] destination-port 8000 

# Configure to make 10 probes per test.

[4210-Remote-Ping-administrator-udpprivate] count 10 

# Set the probe timeout time to 5 seconds.

[4210-Remote-Ping-administrator-udpprivate] timeout 5 

# Start the test.

[4210-Remote-Ping-administrator-udpprivate] test-enable 

# Display test results.

Switch  A

Switch  B

HWPing Client

IP network

10.1.1.1/8

10.2.2.2/8

HWPing Server