3com 4210 PWR 9-Port 3CR17341-91-ME 用户手册

产品代码
3CR17341-91-ME
下载
页码 567
Configuring Domain Name Resolution
551
Configuring Domain 
Name Resolution
Configuring Static 
Domain Name 
Resolution
The IP address you assign to a host name last time will overwrite the previous one 
if there is any.
You may create up to 50 static mappings between domain names and IP 
addresses.
Configuring Dynamic 
Domain Name 
Resolution
You may configure up to six DNS servers and ten DNS suffixes.
Displaying and 
Maintaining DNS
After the above configuration, you can execute the display command and the 
nslookup type command in any view to display the DNS configuration information 
and the DNS resolution result to verify the configuration effect. You can execute 
the reset command in user view to clear the information stored in the dynamic 
domain name resolution cache.
Table 405   Configure static domain name resolution
Operation 
Command 
Remarks 
Enter system view 
system-view 
Configure a mapping 
between a host name and 
an IP address 
ip host hostname ip-address 
Required
No IP address is 
assigned to a host 
name by default.
Table 406   Configure dynamic domain name resolution
Operation 
Command 
Remarks 
Enter the system view 
system-view 
Enable dynamic domain name 
resolution 
dns resolve 
Required
Disabled by default 
Configure an IP address for the 
DNS server 
dns server ip-address 
Required
No IP address is configured 
for the DNS server by 
default. 
Configure DNS suffixes 
dns domain domain-name 
Optional
No DNS suffix is configured 
by default
Table 407   Display and maintain DNS
Operation
Command…
Remarks
Display static DNS 
database
display ip host
Available in any view