Corsair 2GB, DDR3 SDRAM, 1800MHZ, 7-7-7-20, 128Mx8, Dominator Series TWIN3X2048-1800C7DF G 产品宣传页

www.corsair.com

The Dominator Series TWIN3X2048-1800C7DF G is a 2048MByte kit of DDR3 SDRAM DIMMs 
built  using  Corsair’s  latest  high  performance  heat  sink  with  Dual-path  Heat  Xchange  (DHX) 
technology coupled with a Corsair Airflow Fan. This part delivers outstanding performance in 
the  latest  generation  of  dual-channel  DDR3-based  motherboards.  It  has  been  tested 
extensively  in  popular  DDR3  motherboards  to  ensure  compatibility  and  performance  at  its 
rated speed. This memory has been verified to operate at 1800MHz at latencies of 7-7-7-20 at 
2.0V VDIMM.  

Every part is tested in Corsair's factory at 1800MHz, but your actual results may vary depending on the overclocking margin of your CPU and motherboard. Newer motherboards may be 
used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same or greater performance. RAM used on the module may 
change without notice. © July 2007 Corsair Memory, Inc.



  

2048 Megabytes of DDR3 memory



  Two matched CM3X1024-1800C7D G 

modules



  

Using DHX technology providing maximum 

cooling 



  

Comes with Airflow Fan for maximum thermal 

transfer



  

100% tested at 1800MHz in high performance 

DDR3 motherboards



  Lifetime warranty



 

Each module pair is tested together at 1800MHz



  Tested and packaged in pairs



 

Packaged together immediately following

  system test



 

Tested together at 1800MHz, Vdimm = 2.0V, 

at latency settings of 7-7-7-20 on ASUS P5K3 

motherboards



 

Must use sockets DIMM A2 and DIMM B2

    (”black sockets”) to achieve this performance



 

SPD programmed at:



 

JEDEC standard 9-9-9-24 values at

 

    1333MHz

• Optimized fins to maximize ambient airflow through the module array

• Extruded aluminum heat sinks to maximize convective heat dissipation

• Dedicated PCB heat sink