Panduit STH2 Cable Tie Installation Tool, Cable Tie Gun STH2 产品宣传页

NOT INTENDED FOR MEDICAL USE.

User is responsible to determine suitability of

product for intended use.

PA19719A01

REV.: 05  10-2006

© Panduit Corp. 2006

This precision tool has been engineered and designed for use with 

PANDUIT

nylon cable

ties up to .35” wide.  It is not intended for other uses such as cutting or tensioning wires or
other types of fastening devices.

TOOL MAINTENANCE
This tool requires no special operator maintenance.

OPERATION INSTRUCTIONS
1. Loop cable tie around bundle as shown and insert tip up through head. Pull tie up snug

on bundle by hand.

2. Place tool on tie as shown.

3. Squeeze tensioning handles as  necessary to tighten tie to desired tension. (Do not

overtighten tie.)

4. Release handle pressure to the minimum necessary to hold nose against tie head and

squeeze cutter handle to cut off tail from tie.

If tie is breaking when applied, check to see that the ties are not being overly tightened.

Page: 1 of 1

CUTTER
HANDLE

TENSIONING
HANDLES

CUTTER
BLADE

GRIPPER