GEV Stainless steel combination lock IP54 MKP-1110 数据表
产品代码
MKP-1110
18
7. Operation
7.1 Programming Mode
The default master code is 1234.
To get to the programming mode, enter the master code twice in series.
Example: 12341234
If you enter it correctly the LED “red/orange” (3) changes from red to orange. You are now in
the programming mode and you can make the following settings.
You can exit the programming mode with the # key.
To get to the programming mode, enter the master code twice in series.
Example: 12341234
If you enter it correctly the LED “red/orange” (3) changes from red to orange. You are now in
the programming mode and you can make the following settings.
You can exit the programming mode with the # key.
7.2 Setting of Master Codes
To designate a new master code, you have to enter the following combination while you are
in the programming mode:
* 00 MMMM
In this case MMMM stands for the 4-digit number combination of the desired master code.
in the programming mode:
* 00 MMMM
In this case MMMM stands for the 4-digit number combination of the desired master code.
7.3 Setting of User Password
To assign a new user password, you have to enter the following combination while you are in
the programming mode:
Entry combination for user 01 to 19:
* XX UUUU
Entry combination for user 20 to 99:
* 6 XX UUUU
In this case XX stands for the desired user.
In this case UUUU stands for the 4-digit number combination of the desired user password.
the programming mode:
Entry combination for user 01 to 19:
* XX UUUU
Entry combination for user 20 to 99:
* 6 XX UUUU
In this case XX stands for the desired user.
In this case UUUU stands for the 4-digit number combination of the desired user password.